# TSS Building Material Division — full site content for LLMs # TSS Building Material Division > Building Bold, Building Strong. TSS Building Material Division (TSS) is a specialist supplier and exporter of finishing & façade building materials — wall panels, WPC cladding, louvers, uPVC windows & doors, cement boards and roofing — since 1998. ## What we supply - Wall Panels — Decorative interior & exterior panels. (https://construction.techservesolutions.in/materials/category/wall-panels) - WPC Cladding — Wood-plastic composite façades. (https://construction.techservesolutions.in/materials/category/wpc-cladding) - Louvers — Sun-shading & screening profiles. (https://construction.techservesolutions.in/materials/category/louvers) - uPVC Windows & Doors — Sealed, weather-tight fenestration. (https://construction.techservesolutions.in/materials/category/upvc) - Cement Boards — Fire-rated, moisture-proof boards. (https://construction.techservesolutions.in/materials/category/cement-boards) - Roofing Sheets — Metal & polymer roofing. (https://construction.techservesolutions.in/materials/category/roofing) ## Company - A division of Tech Serve Solutions, established 1998. - Specialist partner — specification advice, samples and dependable delivery; supplied across Europe, North America and beyond. - Standards: EN, ASTM, ISO 9001, CE. ## Contact - Email: info@techservesolutions.in - Phone: +1 512 256 1737 - Request a quote: https://construction.techservesolutions.in/contact Source: https://construction.techservesolutions.in/ --- # Building Materials Finishing and façade materials supplied and exported by TSS Building Material Division. ## Categories - Wall Panels — Decorative interior & exterior panels. (https://construction.techservesolutions.in/materials/category/wall-panels) - WPC Cladding — Wood-plastic composite façades. (https://construction.techservesolutions.in/materials/category/wpc-cladding) - Louvers — Sun-shading & screening profiles. (https://construction.techservesolutions.in/materials/category/louvers) - uPVC Windows & Doors — Sealed, weather-tight fenestration. (https://construction.techservesolutions.in/materials/category/upvc) - Cement Boards — Fire-rated, moisture-proof boards. (https://construction.techservesolutions.in/materials/category/cement-boards) - Roofing Sheets — Metal & polymer roofing. (https://construction.techservesolutions.in/materials/category/roofing) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials --- # Wall Panels > Decorative interior & exterior panels. Surfaces that set the tone of a room. Decorative PVC, 3D, fluted and high-pressure-laminate panels — waterproof, fast to fit and built to stay looking new. ## Products - Decorative PVC Wall Panel — Marble & wood looks, click-locked. (https://construction.techservesolutions.in/materials/decorative-pvc-wall-panel) - 3D Wall Panel — Texture that catches the light. (https://construction.techservesolutions.in/materials/3d-wall-panel) - Fluted Wall Panel — Calm, vertical rhythm. (https://construction.techservesolutions.in/materials/fluted-wall-panel) - HPL Panel — High-pressure laminate, indoors or out. (https://construction.techservesolutions.in/materials/hpl-panel) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/wall-panels --- # WPC Cladding > Wood-plastic composite façades. The warmth of timber without the upkeep. Wood-plastic composite cladding — solid, hollow and designer profiles — weatherproof, fade-resistant and ready for the elements. ## Products - WPC Designer Cladding — Architectural façades, low upkeep. (https://construction.techservesolutions.in/materials/wpc-designer-cladding) - WPC Solid Cladding — Dense, hard-wearing boards. (https://construction.techservesolutions.in/materials/wpc-solid-cladding) - WPC Hollow Cladding — Lighter boards, faster spans. (https://construction.techservesolutions.in/materials/wpc-hollow-cladding) - WPC Decking — Barefoot-friendly outdoor floors. (https://construction.techservesolutions.in/materials/wpc-decking) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/wpc-cladding --- # Louvers > Sun-shading & screening profiles. Light, privacy and shadow, controlled. WPC blade, square and rectangular louvers for façades, ceilings and partitions — modular, durable and architectural. ## Products - WPC Blade Louver — Shade and rhythm on the façade. (https://construction.techservesolutions.in/materials/wpc-blade-louver) - WPC Square Louver — Clean square-section grid. (https://construction.techservesolutions.in/materials/wpc-square-louver) - WPC Rectangular Louver — Bold horizontal lines. (https://construction.techservesolutions.in/materials/wpc-rectangular-louver) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/louvers --- # uPVC Windows & Doors > Sealed, weather-tight fenestration. Openings that keep the weather out and the comfort in. uPVC casement, sliding and fixed windows and doors — thermally sealed, multi-point locked and made to last. ## Products - uPVC Casement Window — Wide views, tight seal. (https://construction.techservesolutions.in/materials/upvc-casement-window) - uPVC Sliding Window — Space-saving, smooth glide. (https://construction.techservesolutions.in/materials/upvc-sliding-window) - uPVC Fixed Window — Pure daylight, no draft. (https://construction.techservesolutions.in/materials/upvc-fixed-window) - uPVC Doors — Sealed, secure, weatherproof. (https://construction.techservesolutions.in/materials/upvc-doors) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/upvc --- # Cement Boards > Fire-rated, moisture-proof boards. The dependable substrate behind the finish. Fiber-cement, calcium-silicate and cement-particle boards — non-combustible, moisture-proof and termite-proof. ## Products - Fiber Cement Board — The all-rounder substrate. (https://construction.techservesolutions.in/materials/fiber-cement-board) - Calcium Silicate Board — Fire protection, A1-rated. (https://construction.techservesolutions.in/materials/calcium-silicate-board) - Cement Particle Board — Strength of cement, worked like wood. (https://construction.techservesolutions.in/materials/cement-particle-board) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/cement-boards --- # Roofing Sheets > Metal & polymer roofing. Covers that take the weather, year after year. Galvanised metal, polycarbonate and uPVC roofing sheets — corrosion-free, UV-stable and span-rated. ## Products - Metal Roofing Sheet — Corrugated cover that lasts. (https://construction.techservesolutions.in/materials/metal-roofing-sheet) - Polycarbonate Sheet — Daylight without the heat. (https://construction.techservesolutions.in/materials/polycarbonate-sheet) - uPVC Roofing Sheet — Quiet, rust-free, heat-cutting. (https://construction.techservesolutions.in/materials/upvc-roofing-sheet) ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in Source: https://construction.techservesolutions.in/materials/category/roofing --- # Decorative PVC Wall Panel > Marble & wood looks, click-locked. Our Decorative PVC Wall Panel pairs a rigid, dimensionally stable PVC core with a high-resolution laminated surface that convincingly reproduces natural marble, timber and contemporary solid finishes. Each panel measures 300 x 2900 mm at 9 mm thick and carries a precision-milled click-lock edge on all four sides, so panels engage positively into one another and lie perfectly flat with no visible fixings. The result is a continuous, seamless wall that is installed in a fraction of the time conventional tiling demands. The laminated wear layer is sealed against moisture, giving a surface that is genuinely 100% waterproof and simply wiped clean — making the panel equally at home on a feature wall, a bathroom wet wall, a ceiling or a busy retail interior. Because the panel is lightweight and cuts cleanly with standard tools, it fixes directly to studwork, battens or sound existing substrates using adhesive or mechanical fasteners, with no grout lines to seal or maintain. Manufactured under an ISO 9001 quality system, reaction-to-fire classified to EN 13501-1 and CE marked for construction use, the panel is supplied with full technical documentation and is shipped across Europe, North America and beyond. As a specialist partner, we support projects from sampling through to scheduled container delivery with consistent batch quality and colour matching. ## Technical specifications - Panel size: 300 × 2900 mm - Thickness: 9 mm - Core: Rigid PVC (closed-cell / mineral-filled) - Surface finish: Laminated film — Marble · Wood · Solid - Edge profile: 4-sided click-lock interlock - Density: Typical 1.35–1.55 g/cm³ - Weight per panel: Typical 4.5–5.5 kg - Water absorption: Typical < 0.3% (24 h) - Reaction to fire: Typical Euroclass B-s3,d0 (EN 13501-1) - Thermal conductivity: Typical 0.15–0.19 W/m·K - Linear thermal expansion: Typical 50–60 × 10⁻⁶ /K - Surface wear / scratch: PU-coated wear layer, wipe-clean - Service temperature: -10 °C to +60 °C (interior use) - Coverage per panel: Approx. 0.87 m² nominal - VOC / formaldehyde: Low-VOC, formaldehyde-free - Packaging: Cartons on shrink-wrapped pallets - Category: Wall Panels (https://construction.techservesolutions.in/materials/category/wall-panels) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; this panel is typically classified Euroclass B-s3,d0 (limited combustibility, smoke and flaming-droplet ratings). - EN 13245-2: Unplasticised PVC (PVC-U) profiles for internal and external wall and ceiling finishes — the product family governing rigid PVC cladding panels. - CE marking (CPR 305/2011): Declaration of performance under the EU Construction Products Regulation, confirming reaction-to-fire and essential characteristics for placing on the EU/UK market. - ISO 9001: Quality management system governing manufacture, batch traceability and consistent dimensional and colour control. - ASTM E84: US surface-burning characteristics (flame spread / smoke developed) — the North American equivalent reference for interior finish fire performance. ## Applications - Living & feature walls: Creates a seamless marble or timber feature wall in living and hospitality spaces without grout lines or specialist trades. - Bathroom & wet walls: Fully waterproof construction makes the panel ideal for shower surrounds, splashbacks and humid bathroom walls. - Ceilings: Lightweight panels fix cleanly to ceiling battens or grids for a continuous, wipe-clean overhead finish. - Retail & commercial interiors: Fast installation and a hard-wearing surface suit shopfits, reception areas and high-traffic display walls. - Kitchens & utility areas: Hygienic, easy-clean surface resists moisture and everyday splashes behind worktops and in service zones. ## Features & benefits - 100% waterproof: Sealed laminated surface and non-absorbent PVC core withstand permanent humidity and direct splashing. - Click-lock installation: Four-sided interlocking edges engage by hand for a flat, fixing-free finish that cuts labour by roughly half versus tiling. - Wipe-clean surface: Non-porous PU-coated film cleans with a damp cloth and resists staining, mould and everyday marking. - Realistic decorative finishes: High-resolution marble, wood and solid laminates deliver a premium look with authentic depth and texture. - Lightweight & easy to cut: Trims cleanly with a knife or fine-tooth saw and is light enough for single-person handling on site. ## Installation & handling - Acclimatise panels flat in the room for at least 24–48 hours before fitting to stabilise to ambient temperature. - Fix to a flat, dry, sound substrate, timber battens or studwork using a recommended PVC/MS-polymer adhesive or mechanical fasteners. - Start from a true vertical reference line; engage the click-lock edge of each panel into the previous and seat firmly until it lies flush. - Cut to length and trim openings with a sharp knife, fine-tooth saw or jigsaw; finish edges and junctions with matching trims or sealant. - Leave a small expansion allowance at perimeters and around fixed features to accommodate normal thermal movement. - Use colour-matched silicone at wet junctions (shower trays, basins) to maintain the waterproof line. ## Variants & finishes - Marble finish: Veined marble and stone-effect laminates, gloss or matt - Wood finish: Plank and timber-grain decors in natural and contemporary tones - Solid finish: Plain and textured solid colours for accent and full-wall schemes - Panel format: 300 × 2900 mm × 9 mm (standard) - Surface gloss: High-gloss or matt lamination on request - Trim & profiles: Matching internal/external corners, end caps and joint trims ## Quality & supply Stock decors typically ship in 1–2 weeks, while made-to-order finishes, custom gloss levels and matching trim packs are programmed on a project schedule, usually 4–6 weeks subject to volume. Physical samples and decor cards are available before commitment so colour and texture can be approved on site, and every order is produced under an ISO 9001 system with batch numbering for colour consistency across a wall. Each consignment is supported by a full Technical Data Sheet, EN 13501-1 reaction-to-fire classification, CE Declaration of Performance and a product warranty, with care and installation guidance supplied as standard. We export worldwide — across Europe, North America and beyond — handling export packing, palletisation and complete shipping documentation to keep customs clearance straightforward. ## Frequently asked questions ### Are these panels genuinely waterproof enough for a shower wall? Yes. The PVC core is non-absorbent and the laminated surface is sealed, so panels suit shower surrounds and wet walls when joints and wet-edge junctions are sealed with colour-matched silicone. ### What is the reaction-to-fire classification? Panels are typically classified Euroclass B-s3,d0 to EN 13501-1, indicating limited combustibility for interior use. We confirm the exact classification per finish on the Declaration of Performance and test report. ### Can the panels be fitted directly over existing tiles or plaster? Yes, provided the substrate is flat, dry and sound. Panels bond with a suitable PVC/MS-polymer adhesive or fix to battens; uneven walls should be battened out first. ### How much faster is installation compared with tiling? The four-sided click-lock system removes grouting and most setting-out, typically cutting installation labour by around half versus conventional ceramic tiling. ### Are the panels suitable for ceilings? Yes. At roughly 4.5–5.5 kg per panel they are light enough to fix to ceiling battens or grids and give a continuous, wipe-clean overhead finish. ### What documentation is provided for export and compliance? Each order ships with a Technical Data Sheet, EN 13501-1 classification, CE Declaration of Performance, warranty and care guidance, plus full export and shipping paperwork. ### Can you supply matching trims and samples before we order? Yes. Colour-matched corners, end caps and joint trims are available, and physical samples or decor cards can be provided so finishes are approved before production. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/decorative-pvc-wall-panel --- # 3D Wall Panel > Texture that catches the light. The 3D Wall Panel transforms an ordinary flat surface into a sculpted feature wall. Each tile carries a deep, repeating relief pattern that reads as shadow and highlight as light moves across it, giving depth and rhythm to receptions, headboards and hospitality interiors without the weight or cost of plaster mouldings or carved stone. Formed from rigid PVC or compressed plant fibre, the panels are light enough to lift and fix by hand yet dimensionally stable across normal interior conditions. They arrive primer-ready and accept emulsion, eggshell or spray finishes, so the same panel can be specified matt white, a deep accent tone or a metallic effect to suit the scheme. Panels butt together on a tessellating edge so the relief continues seamlessly across large runs with the joints visually lost in the pattern. They bond directly to plasterboard, plaster, MDF or any sound, dry substrate using a grab adhesive, making them well suited to refurbishment and fast fit-out programmes. Supplied to international interior-lining standards across Europe, North America and beyond. ## Technical specifications - Pattern: Sculpted relief, tessellating - Material: Rigid PVC or compressed plant fibre - Nominal tile size: 500 × 500 mm (typical) - Panel thickness: 1.0–3.0 mm sheet, 12–30 mm relief depth (typical) - Weight per tile: ~0.4–0.9 kg (typical, by material) - Finish: Primed, paintable (emulsion / eggshell / spray) - Fixing method: Grab adhesive to sound substrate - Reaction to fire: Typ. Euroclass B-s2,d0 to D-s2,d0 (EN 13501-1, grade-dependent) - Density: PVC ~1.4 g/cm³; plant-fibre board ~0.8–1.0 g/cm³ (typical) - Water absorption: PVC <0.2%; fibre board higher, interior dry use (typical) - Thermal conductivity (λ): ~0.16–0.19 W/m·K (typical) - Linear thermal expansion: PVC ~7×10⁻⁵ /K (typical) - Service environment: Interior, dry; not for permanent wet or exterior exposure - Coverage: 4 tiles per m² at 500 × 500 mm (typical) - Packaging: Flat-packed cartons, interleaved, on shrink-wrapped pallets - Category: Wall Panels (https://construction.techservesolutions.in/materials/category/wall-panels) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification (Euroclass) for the panel as a wall and ceiling lining. - EN 13986: Wood-based panels for construction — properties and conformity, applicable to the plant-fibre variant. - EN ISO 11925-2: Single-flame ignitability test underpinning the reaction-to-fire class. - ISO 9001: Quality-management system governing manufacture, inspection and batch traceability. - CE marking: Declaration of conformity to the applicable harmonised European standards for placing on the EU/UKCA market. ## Applications - Feature walls: Creates a single sculpted accent wall in living spaces, offices and retail that draws the eye and adds depth. - Reception & lobby: Forms a textured backdrop behind desks and logos for a strong, considered first impression. - Headboards: Builds a soft, three-dimensional headboard zone in bedrooms and hotel rooms without joinery. - Hospitality: Lines bars, restaurants and lounges with relief texture that photographs well under accent lighting. - Commercial fit-out: Refreshes corridors, meeting rooms and break-out areas quickly over existing sound surfaces. ## Features & benefits - Bold relief texture: Deep sculpted pattern reads as light and shadow, giving a flat wall genuine three-dimensional depth. - Lightweight: Each tile lifts and positions by hand, speeding installation and reducing load on the substrate. - Paint to any colour: Primed surface accepts emulsion, eggshell or spray, so the panel matches any scheme on site. - Easy fix: Bonds directly with grab adhesive to plasterboard, plaster or MDF — no battens or sub-frame needed. - Seamless tessellation: Matched edges let the relief continue across large runs with joints lost in the pattern. ## Installation & handling - Fix only to a sound, dry, clean and reasonably flat substrate such as plasterboard, plaster, MDF or painted masonry. - Acclimatise panels flat in the room for 24–48 hours before fixing to stabilise to interior temperature and humidity. - Apply a continuous bead grab adhesive to the panel back, press firmly into place and align the pattern edges before the next tile. - Cut to size with a fine-tooth blade or sharp knife; plan the layout from a centre line so border tiles balance. - Fill and sand butt joints if a fully monolithic surface is wanted, then prime any cut edges before painting. - Keep for interior, dry locations; avoid permanently wet, high-humidity or exterior exposure. ## Variants & finishes - Material: Rigid PVC or compressed plant fibre - Pattern: Range of sculpted relief geometries (wave, diamond, block and organic) - Finish: White primed (paint-ready) as standard - Tile size: 500 × 500 mm standard; other formats made to order - Relief depth: Low-profile or deep-relief options ## Quality & supply Standard patterns in white primed finish are typically held in stock for rapid despatch, while bespoke patterns, formats, factory colours and project volumes are made to order with indicative lead times confirmed at enquiry. Physical samples and pattern swatches are available for specification and approval before commitment. Every order ships with full documentation — a technical data sheet, reaction-to-fire and conformity test reports, the CE declaration of performance where applicable and a product warranty — and we supply across Europe, North America and beyond with complete export paperwork to suit the destination market. ## Frequently asked questions ### Are these panels suitable for bathrooms or other wet areas? The PVC variant tolerates occasional splash and humidity, but the range is specified for interior, dry locations. We do not recommend permanently wet, steam-heavy or exterior use; ask us about dedicated wet-area panels for those settings. ### Do the panels come pre-finished or do they need painting? They are supplied white primed and paint-ready. Apply emulsion, eggshell or a spray finish in any colour. We can also discuss factory-applied colours on made-to-order runs. ### What is the fire classification? Reaction to fire is typically Euroclass B-s2,d0 to D-s2,d0 to EN 13501-1, depending on material and finish. We confirm the exact class and provide the supporting test report for your specified product. ### What substrates can the panels be fixed to? Any sound, dry, clean surface — plasterboard, plaster, MDF or painted masonry — using a grab adhesive. No battens or sub-frame are required, which makes them well suited to refurbishment. ### How are the joints handled so the wall looks seamless? The tessellating edges let the relief pattern continue across panels with the joint hidden in the geometry. For a fully monolithic surface, fill and sand the butt joints, then prime before painting. ### How are the panels packed and shipped for export? Panels are interleaved in flat-packed cartons on shrink-wrapped pallets to protect the relief faces, and we ship worldwide with full export documentation suited to the destination. ### Can we order a custom pattern or tile size? Yes. Standard 500 × 500 mm patterns are typically stocked; bespoke patterns, formats and project volumes are made to order with lead times confirmed at enquiry. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/3d-wall-panel --- # Fluted Wall Panel > Calm, vertical rhythm. The TSS Fluted Wall Panel is a slatted WPC (wood-plastic composite) lining panel engineered to bring warmth and a calm, vertical rhythm to interior walls and ceilings. Each panel combines a fluted slat face with a continuous backing board, so individual battens read as a clean run of timber-toned ribs while concealed tongue-and-groove edges hide every joint. The result is a refined acoustic-friendly surface that installs quickly over battens or a flat substrate. Manufactured from a stabilised wood-fibre and polymer matrix, the panels resist the cracking, warping and moisture movement associated with solid timber, while retaining a natural wood feel underfoot for the eye and hand. Warm wood tones and a charcoal option suit reception areas, feature walls, partitions and suspended-ceiling details across hospitality, commercial and residential interiors. Supplied across Europe, North America and beyond, the range is produced to recognised European and international standards for reaction-to-fire, wood-based panel performance and acoustic absorption, and is despatched with full technical and test documentation for specification and approval. ## Technical specifications - Profile: Fluted / slat with backing board - Material: WPC (wood-plastic composite) - Finish: Warm wood tones · charcoal - Length: Up to 2900 mm - Panel width: Typical 150 mm (coverage face) - Panel thickness: Typical 12 mm (rib depth to backing) - Density: Typical 1.20–1.40 g/cm³ - Reaction to fire: Typical Class B-s2,d0 (EN 13501-1) - Sound absorption: Typical αw 0.20–0.45 with cavity backing (EN ISO 11654) - Water absorption: Typical < 1.5% (24 h immersion) - Thermal conductivity: Typical 0.18–0.30 W/m·K - Linear thermal expansion: Typical 30–50 µm/m·K - Edge detail: Concealed tongue-and-groove joint - Weight per unit: Typical 1.8–2.4 kg per linear metre - Application: Interior walls and ceilings - Packaging: PE-wrapped bundles on pallets, protective film on face - Category: Wall Panels (https://construction.techservesolutions.in/materials/category/wall-panels) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; the panels are tested and classified (typically Class B-s2,d0) for use in interior linings. - EN 15534: Composites made from cellulose-based materials and thermoplastics (WPC) — defines material characterisation and test methods for profiles used in cladding and decking applications. - EN 13986: Wood-based panels for use in construction — characteristics, evaluation of conformity and marking relevant to panel products in internal applications. - EN ISO 11654: Acoustics — sound absorbers for use in buildings; rating of sound absorption underpinning the weighted absorption coefficient (αw) of the slatted face with a cavity. - ISO 9001: Quality management system governing manufacture, inspection and traceability of supplied product. ## Applications - Feature walls: Creates a warm, vertically ribbed focal surface in lobbies, lounges and living spaces. - Ceilings: Lines flat and suspended ceilings to carry the slat rhythm overhead and soften reflected sound. - Partitions: Faces freestanding and dividing partitions to zone open-plan interiors with a tactile, timber-toned finish. - Reception areas: Delivers a calm, premium backdrop for reception desks and waiting areas in commercial and hospitality settings. - Corridors and circulation: Adds directional rhythm and a durable, wipe-clean surface to high-traffic interior routes. - Retail and showroom fit-out: Provides a refined display backdrop that frames merchandise without competing for attention. ## Features & benefits - Warm wood tones: Natural timber-look finishes and a charcoal option bring warmth and depth to any interior scheme. - Softer acoustics: The slatted profile with a backing cavity helps absorb mid-range sound and calm room reverberation. - Concealed joints: Tongue-and-groove edges interlock panel to panel for a continuous run with no visible fixings. - Dimensionally stable: The WPC matrix resists the warping, splitting and moisture movement common to solid timber indoors. - Fast to install: Lightweight panels in long lengths cover area quickly over battens or a flat substrate. - Low-maintenance surface: A sealed composite face wipes clean and holds its colour through everyday interior use. ## Installation & handling - Acclimatise panels flat in the installation space for 24–48 hours before fixing to stabilise to room temperature and humidity. - Fix to a level, dry substrate or to battens at typical 300–400 mm centres; pack out as needed to keep the face true. - Engage the tongue-and-groove edge fully and conceal fixings within the groove, or bond with a recommended construction adhesive. - Leave a small expansion gap at perimeters and abutments to accommodate normal thermal movement, then close with matching trims or end caps. - Cut with a fine-tooth blade for clean rib edges and support the panel close to the cut line. - Designed for interior use only; do not install in continuously wet areas or in unprotected external exposure. ## Variants & finishes - Profile: Fluted slat with integral backing board - Wood-tone finishes: Light oak, natural walnut and warm teak tones - Charcoal finish: Matte charcoal / anthracite - Standard length: Up to 2900 mm - Coverage width: Typical 150 mm face - Trims and accessories: Matching end caps, internal and external corner profiles ## Quality & supply Stocked finishes are typically available for prompt despatch, while made-to-order tones, lengths and project volumes are produced on a planned lead time confirmed at enquiry; physical samples and finish swatches are provided ahead of commitment so colour and profile can be approved on site. Every consignment ships with full documentation — Technical Data Sheet, reaction-to-fire and acoustic test reports, declaration of performance for CE marking and a product warranty — and the range is supplied across Europe, North America and beyond with complete export paperwork to support specification, customs clearance and project sign-off. ## Frequently asked questions ### What is the fire classification of the panels? They are tested to EN 13501-1 and typically achieve Class B-s2,d0, suitable for many interior lining applications. We confirm the classified value and supply the test report for your specific project and finish. ### Are these panels suitable for outdoor or wet-area use? No. The Fluted Wall Panel is an interior product for walls and ceilings. For external façades or fully wet zones we can advise on our exterior-rated WPC cladding instead. ### How much sound absorption do they provide? The slatted face over a backing cavity offers useful mid-range absorption, with a typical weighted coefficient (αw) of around 0.20–0.45 depending on the cavity depth and any acoustic backing used. Rated to EN ISO 11654. ### How are the panels fixed and are joints visible? They interlock with a concealed tongue-and-groove edge, so fixings sit within the groove and panel-to-panel joints read as a continuous run. They can be screwed to battens or bonded to a flat substrate. ### What lengths and finishes are available? Panels are supplied up to 2900 mm long with a typical 150 mm coverage face, in warm wood tones and a charcoal option. Made-to-order tones and lengths are available for project quantities. ### Can I get samples before ordering? Yes. We provide physical samples and finish swatches so you can approve colour, rib profile and texture before committing to a project order. ### Do you export and provide documentation? Yes. We supply across Europe, North America and beyond, with full export paperwork plus the Technical Data Sheet, test reports, declaration of performance and warranty for every order. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/fluted-wall-panel --- # HPL Panel > High-pressure laminate, indoors or out. HPL Panel from TSS Building Material Division is a compact high-pressure laminate built for both exterior façades and interior feature walls. Manufactured by fusing layers of kraft cellulose fibre with decorative surface papers under high heat and pressure, the result is a dense, dimensionally stable panel that performs reliably in demanding climates while holding crisp colour and pattern. Engineered to EN 438, the panels combine a UV-stable decorative face with a hard, scratch-resistant surface that resists everyday wear, graffiti and weathering. An optional self-cleaning finish helps shed dirt and rainwater, keeping façades looking sharp with minimal maintenance across the life of the building. Supplied across Europe, North America and beyond in 6 mm and 8 mm thicknesses and a 1220 × 2440 mm standard sheet, HPL Panel is available in solid colours, realistic wood and stone reproductions, and a choice of matt, gloss and textured finishes. It is a precise, versatile partner for ventilated rainscreen cladding, balconies, soffits, lockers, sanitary cubicles and furniture. ## Technical specifications - Thickness: 6 / 8 mm - Sheet size: 1220 × 2440 mm - Finish: Matt · gloss · textured - Décor range: Solids · wood · stone - Core type: Compact HPL (EGF) — kraft cellulose with thermosetting resin - Density: ≥ 1,350 kg/m³ (typical) - Weight per unit: ~8.1 kg/m² at 6 mm · ~10.8 kg/m² at 8 mm (typical) - Reaction to fire: Euroclass B-s2,d0 to EN 13501-1 (FR grade, typical) - Water absorption: ≤ 2% after 24 h immersion (typical) - Weather/light fastness: EN 438-2 ≥ Grade 4–5 (grey scale), exterior EDF grade - Surface abrasion (Taber): ≥ 350 revolutions to initial wear point (typical) - Thermal conductivity (λ): ~0.30 W/m·K (typical) - Linear thermal expansion: ~25 × 10⁻⁶ /K (length / width, typical) - Flexural modulus: ≥ 9,000 MPa (EN ISO 178, typical) - Service temperature: −20 °C to +80 °C (typical) - Packaging: Horizontal stacks on heat-treated pallets, edge-protected and film-wrapped - Category: Wall Panels (https://construction.techservesolutions.in/materials/category/wall-panels) ## Standards & compliance - EN 438: Product standard for decorative high-pressure laminates (HPL) — defines compact-grade types, exterior (EDF/EGF) classifications and the full suite of performance tests. - EN 13501-1: Reaction-to-fire classification (Euroclass) for construction products; FR-grade panels are typically rated B-s2,d0. - EN 438-6: Specific requirements for exterior-grade compact laminates used in ventilated façade and cladding applications, including weathering performance. - CE marking: Declaration of conformity to the applicable harmonised European requirements for cladding panels placed on the EU/EEA market. - ISO 9001: Manufacturing quality-management system governing consistent production, traceability and batch control. ## Applications - Exterior façades: Ventilated rainscreen cladding on commercial, residential and institutional buildings, fixed to aluminium or timber sub-frames. - Feature walls: Durable, high-impact interior wall linings for lobbies, corridors, retail and hospitality interiors. - Balconies & soffits: Weather-exposed balcony infills, fascias and undersides where moisture and UV resistance are essential. - Furniture: Worktops, vertical surfaces and shelving where a hard-wearing, hygienic decorative face is required. - Lockers & toilets: Sanitary cubicles, vanity units and lockers in schools, gyms and public buildings, resistant to moisture and cleaning chemicals. - Signage & wayfinding: Robust exterior and interior panels for entrance signs, plaques and directional graphics. ## Features & benefits - UV stable: A double-hardened acrylic/PUR surface keeps colours and patterns true under sustained sunlight and weathering. - Scratch resistant: A dense, abrasion-resistant face withstands knocks, foot traffic and intensive cleaning without marking. - Self-cleaning surface: An optional low-adhesion finish sheds dirt and rainwater, reducing façade cleaning and upkeep. - Indoor & outdoor: One material family covers exterior cladding and interior linings, simplifying specification and detailing. - Moisture stable: Low water absorption keeps panels dimensionally stable in humid and rain-exposed locations. - Impact & graffiti resistant: The hard surface resists graffiti, solvents and impact, making it suited to high-traffic public areas. ## Installation & handling - Acclimatise panels flat and stacked on site for 48–72 hours before fixing so they reach equilibrium with ambient conditions. - Fix to a ventilated sub-frame using either visible riveting/screwing or concealed undercut anchors, following the chosen system's fixing pattern. - Allow expansion clearance at fixing points and panel joints (typically 2–2.5 mm/m) to accommodate thermal and humidity movement. - Use one fixed point per panel with the remaining points sliding, so the panel can expand symmetrically. - Cut and drill with carbide- or diamond-tipped tooling and support the panel fully to achieve clean, chip-free edges. - Store horizontally on a flat, dry base with the protective film in place until installation is complete. ## Variants & finishes - Thickness: 6 mm · 8 mm (compact grade) - Surface finish: Matt · gloss · textured / structured - Décor family: Solid colours · wood reproductions · stone & concrete effects - Grade: Interior (standard) · exterior (EDF/EGF weather grade) - Fire performance: Standard · FR grade to B-s2,d0 (EN 13501-1) - Sheet format: 1220 × 2440 mm standard; larger formats available made-to-order ## Quality & supply Stock décors and standard formats typically ship within 1–2 weeks, while made-to-order colours, textures, exterior grades and large-format sheets are generally produced in 4–6 weeks depending on volume and finish. Physical samples and décor swatches are available on request for design approval and mock-ups. Every consignment is supplied with full documentation — Technical Data Sheet (TDS), EN 438 / EN 13501-1 test reports, CE Declaration of Performance and product warranty — and we export worldwide across Europe, North America and beyond with complete export and shipping paperwork. ## Frequently asked questions ### Can the same HPL Panel be used both outdoors and indoors? Yes — exterior (EDF/EGF) weather-grade panels are engineered for façades and external exposure, while standard grades suit interior linings and furniture. We confirm the correct grade against your application. ### What fire rating is available? FR-grade panels are typically classified B-s2,d0 to EN 13501-1, suitable for many façade and public-building requirements. The exact classification is stated on the test report supplied with each order. ### How are exterior panels fixed to a building? They mount onto a ventilated rainscreen sub-frame in aluminium or treated timber, using either visible rivets/screws or concealed undercut anchors, always with expansion clearance designed into the joints. ### Will the colour fade in strong sunlight? Exterior-grade panels carry a UV-stable, double-hardened surface and are tested for light and weather fastness to EN 438-2, holding colour reliably over long-term outdoor exposure. ### Does the self-cleaning surface need special maintenance? No — the low-adhesion finish sheds most dirt with rainfall. Occasional washing with water and a mild, non-abrasive detergent keeps the surface in good condition. ### What thicknesses and sizes can you supply? Standard panels are 6 mm and 8 mm in a 1220 × 2440 mm sheet. Larger formats and additional thicknesses can be produced to order for specific projects. ### What documentation comes with each shipment? Each order includes a Technical Data Sheet, EN 438 and EN 13501-1 test reports, a CE Declaration of Performance, a product warranty and full export documentation for worldwide delivery. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/hpl-panel --- # WPC Designer Cladding > Architectural façades, low upkeep. WPC Designer Cladding combines the warmth and grain of natural timber with the engineered durability of a co-extruded wood-plastic composite. Each board pairs a structural WPC core with a tough polymer cap layer that locks out moisture, resists UV fade and shrugs off the surface staining, mould and movement that plague conventional softwood cladding. The designer profile gives architects a refined, contemporary façade line without the lifetime burden of painting, oiling or sealing. Engineered for permanent exterior exposure, the boards hold their colour and finish across hot summers, freeze-thaw winters and coastal salt air. The capped surface is splinter-free, low-maintenance and washes down with plain water, making the system ideal for high-traffic frontages, entrance features and boundary treatments where appearance must endure with minimal intervention. Supplied across Europe, North America and beyond, the range is manufactured to recognised European and international standards and ships with full technical and test documentation. A consistent profile geometry and concealed clip fixing deliver clean, repeatable installation on both new build and refurbishment projects. ## Technical specifications - Profile: Designer (rear-ventilated, concealed clip) - Material: Wood-plastic composite (WPC) with co-extruded polymer cap - Finish: Co-extruded embossed wood grain - Use: Exterior grade / ventilated façade - Typical board width: 150–160 mm (coverage) - Typical board thickness: 21–23 mm - Typical board length: 2,900–3,600 mm - Typical density: 1,250–1,400 kg/m³ - Reaction to fire: Typical Class B-s1,d0 to D-s2,d0 (EN 13501-1) - Water absorption: Typical ≤ 2% by mass (24 h immersion) - Thermal conductivity: Typical 0.25–0.35 W/m·K - Linear thermal expansion: Typical 30–50 × 10⁻⁶ /K - Slip / surface: Splinter-free, low-maintenance capped surface - Typical weight: Approx. 4.5–5.5 kg per linear metre - Colour stability: Typical ΔE ≤ 5 after accelerated weathering - Packaging: Strapped bundles on pallets, edge-protected and shrink-wrapped - Category: WPC Cladding (https://construction.techservesolutions.in/materials/category/wpc-cladding) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; establishes the Euroclass (e.g. B-s1,d0) declared for the boards. - EN 15534: Composites made from cellulose-based materials and thermoplastics (WPC) — characterisation, requirements and test methods for profiles used in cladding and decking. - EN 14915: Solid wood and wood-based panelling and cladding — performance characteristics and conformity evaluation relevant to façade cladding products. - ISO 9001: Quality management systems governing manufacture, traceability and consistent batch-to-batch quality of the production facility. - CE marking: Declaration of performance against the applicable harmonised standard, confirming the product may be placed on the European market. ## Applications - Building façades: Ventilated rainscreen cladding for residential, commercial and mixed-use frontages where a timber aesthetic must last with minimal upkeep. - Entrance features: Statement porches, canopies and reception surrounds that introduce warmth and texture at the building threshold. - Boundary walls: Durable cladding to perimeter and screen walls, delivering privacy and a coordinated finish across the plot. - Soffits: Underside lining to eaves, overhangs and walkways, providing a clean, moisture-tolerant finish in sheltered exterior zones. - Balcony & terrace screening: Vertical or horizontal infill panels that match adjoining decking and façade lines for a unified scheme. ## Features & benefits - Weatherproof: The co-extruded cap seals the core against rain, humidity and freeze-thaw cycling for stable, long-term exterior performance. - Fade resistant: UV-stabilised capping holds colour with minimal shift, keeping façades looking consistent year after year. - No painting: The factory finish never needs oiling, staining or repainting — routine washing with water keeps it presentable. - Easy installation: Concealed clip fixing and consistent profile geometry give fast, fastener-free face installation on standard battens. - Splinter-free & low-maintenance: The capped surface resists splitting, cracking and surface mould, reducing whole-life maintenance cost. - Dimensionally stable: The engineered WPC composition limits swelling, warping and movement compared with natural timber cladding. ## Installation & handling - Install over a rear-ventilated batten frame, maintaining a continuous air gap behind the boards to manage moisture and heat. - Allow expansion gaps at board ends and abutments per the technical data sheet to accommodate thermal movement. - Fix using the matched concealed clip system and corrosion-resistant stainless fasteners suited to the exposure category. - Acclimatise boards on site, flat and supported, before installation; store off the ground and protected from prolonged direct sun. - Set consistent batten centres (typically 400–600 mm) to support the profile and keep face lines true. - Cut with standard fine-tooth woodworking tools; de-burr edges and clear swarf from the ventilation cavity. ## Variants & finishes - Profile: Designer — concealed clip, rear-ventilated face board - Finish: Co-extruded embossed wood grain - Colour range: Warm oak, walnut, teak, charcoal, slate grey and stone tones - Orientation: Suitable for horizontal or vertical installation - Length options: Cut to project lengths within the standard range (typically up to ~3,600 mm) - System components: Matched starter trims, corner and edge profiles, clips and fasteners ## Quality & supply Stock colours and standard lengths typically dispatch within a short lead time, while bespoke colours, lengths and high-volume project quantities are produced to order with lead times confirmed at enquiry; physical samples and colour swatches are available on request. Every consignment ships with full documentation — technical data sheet (TDS), reaction-to-fire and performance test reports, declaration of performance for CE marking, and a written product warranty against fade and structural integrity — and we supply across Europe, North America and beyond with complete export paperwork, including commercial invoice, packing list and certificate of origin, prepared to suit the destination market. ## Frequently asked questions ### Does WPC Designer Cladding ever need painting or sealing? No. The co-extruded cap is the finished surface and requires no painting, oiling or sealing — routine cleaning with water and a soft brush is all that is needed. ### What fire classification does it carry? Reaction to fire is classified to EN 13501-1, with a typical Euroclass in the range B-s1,d0 to D-s2,d0 depending on profile and formulation. The exact declared class for the supplied product is stated on the TDS and declaration of performance. ### How much will the boards fade outdoors? The capping is UV-stabilised and holds colour well, with a typical colour change of ΔE ≤ 5 after accelerated weathering. A slight, even mellowing in the first months is normal and stabilises thereafter. ### Can it be installed vertically as well as horizontally? Yes. The designer profile suits both horizontal and vertical installation over a ventilated batten frame; orientation only affects batten layout and trim selection. ### How is it fixed — are fasteners visible? Boards are secured with a concealed clip system onto battens, so no face fixings are visible. Stainless fasteners appropriate to the exposure category are used with the clips. ### Is a ventilation gap behind the cladding necessary? Yes. The system is designed as a rear-ventilated rainscreen; a continuous air gap behind the boards is required to manage moisture and thermal performance and to validate the warranty. ### Do you supply matching trims and accessories, and can you ship internationally? Yes. Matched starter, corner and edge profiles, clips and fasteners are available, and the range is supplied across Europe, North America and beyond with full technical and export documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-designer-cladding --- # WPC Solid Cladding > Dense, hard-wearing boards. WPC Solid Cladding is engineered for façades that take punishment. With a fully solid core rather than a hollow chamber, each board carries more material per metre, giving it the density, impact resistance and dimensional stability demanded by high-traffic frontages, ground-level walls and exposed elevations. The wood-plastic composite combines cellulose fibre with a stabilised polymer matrix and UV-resistant pigments, so the wood-grain surface resists fading, splitting and the seasonal movement that troubles natural timber. Because the core is continuous, these boards absorb knocks and point loads that would dent or crack lighter profiles, while remaining stable through wet-dry and freeze-thaw cycles. They will not rot, will not feed termites and need no painting, oiling or sealing over their service life — only routine washing. The result is a finishing material that holds its line and colour year after year in real climates. Supplied across Europe, North America and beyond, WPC Solid Cladding is manufactured to EN 15534 and CE-marked, with reaction-to-fire classification to EN 13501-1 and full technical documentation available for specification, tender and customs. ## Technical specifications - Core: Solid (continuous, non-hollow) - Material: Wood-plastic composite (cellulose fibre + stabilised polymer) - Finish: Embossed wood grain - Use: Exterior grade — ventilated façade / cladding - Density: Typical 1.25–1.35 g/cm³ - Reaction to fire: Typical Class B-s2,d0 to EN 13501-1 (grade-dependent) - Water absorption (24 h): Typical ≤ 1.5% - Thermal expansion: Typical 30–50 µm/m·°C - Thermal conductivity: Typical 0.20–0.30 W/m·K - Impact resistance: High — no surface damage at typical falling-mass test loads - Flexural strength: Typical ≥ 20 N/mm² - Slip / surface: Embossed, low-glare grain - Service temperature: Typical −30 °C to +60 °C - Wood content: Typical 55–60% by weight - Weight: Typical 4–6 kg per linear metre (profile-dependent) - Colour stability: UV-stabilised; limited initial tonal settling, then stable - Category: WPC Cladding (https://construction.techservesolutions.in/materials/category/wpc-cladding) ## Standards & compliance - EN 15534 (Parts 1, 4 & 5): Characterisation and requirements for wood-polymer composite (WPC) profiles and cladding — mechanical, swelling, water-resistance and durability test methods. - EN 13501-1: Reaction-to-fire classification of construction products; this board is typically classified Class B-s2,d0 (grade-dependent). - ASTM D7032: Standard specification for establishing the performance ratings of WPC and plastic-lumber decking and cladding boards (US equivalent). - CE marking: Declared performance and conformity for placing the product on the European market in line with the applicable harmonised provisions. - ISO 9001: Quality management system governing manufacture, batch traceability and consistent product output. ## Applications - Exposed façades: Dense solid core holds colour and line on fully weather-exposed elevations through wet-dry and freeze-thaw cycles. - Commercial exteriors: Impact-tough boards suit retail, hospitality and public-building frontages where knocks and high footfall are routine. - Feature walls: Wood-grain finish delivers a warm timber look for entrances, signage walls and accent elevations without timber upkeep. - Fencing: Solid section gives the rigidity and termite resistance needed for boundary screens, gates and privacy walls. - Balcony and terrace screens: Stable, low-maintenance boards for balustrade infill and outdoor screening exposed to sun and rain. - Ground-level cladding: Hard-wearing surface stands up to impact and splash zones at base courses and plinth lines. ## Features & benefits - High impact strength: The continuous solid core resists dents and cracking from knocks and point loads better than hollow profiles. - Dimensionally stable: Low, predictable thermal movement keeps joints tight and lines straight across the seasons. - Termite proof: The polymer-bound composite offers no food source for termites or wood-boring insects. - Long life: Will not rot, warp or splinter, and needs no painting, oiling or sealing — only routine cleaning. - UV-stabilised colour: Pigments and UV inhibitors hold the surface tone after initial settling, resisting fade on sun-exposed walls. - Moisture resistant: Low water absorption keeps the board stable in rain, splash and high-humidity exposure. ## Installation & handling - Install as a ventilated rainscreen on aluminium or treated timber battens, maintaining a continuous air gap behind the boards. - Leave expansion gaps at board ends and abutments per the fixing guide to accommodate thermal movement; do not pin boards rigidly at both ends. - Use the matched clip or screw system with corrosion-resistant stainless fixings; pre-drill and counterbore for face-fixed details. - Acclimatise boards flat and supported on site before installation, and keep batten centres within the spacing stated in the technical data sheet. - Cut with carbide-tipped tools; de-burr edges and seal exposed cut ends where the fixing guide requires. - Store flat on bearers, clear of the ground, and keep packs protected and dry until installation. ## Variants & finishes - Finish: Embossed wood grain (matt, low-glare) - Profile: Solid plank / shiplap and square-edge options - Colour range: Natural timber tones — oak, teak, walnut, charcoal and grey (representative) - Core: Solid (this product); co-extruded capped solid available to order - Length: Standard run lengths, made-to-order cut lengths on request - Fixing system: Concealed clip or face-fix screw, supplied to match the profile ## Quality & supply Stock profiles and popular wood-grain tones typically ship within a short lead time, while bespoke colours, profiles and cut lengths are made to order with longer planning; indicative lead times are confirmed at enquiry. Representative samples and colour cards are available before commitment, and every order is supported with full documentation — Technical Data Sheet, EN 13501-1 reaction-to-fire classification, EN 15534 test references, Declaration of Performance / CE documentation, care-and-fixing guidance and a product warranty. We supply across Europe, North America and beyond, with export packing, marine-grade protection and complete shipping and customs paperwork prepared for each consignment. ## Frequently asked questions ### How is solid-core WPC cladding different from hollow board? The core is continuous rather than chambered, so the board carries more material per metre. That gives noticeably higher impact resistance, rigidity and a more solid feel — the right choice for high-traffic, ground-level and exposed walls. ### What fire classification do the boards achieve? Premium solid WPC cladding is typically classified Class B-s2,d0 to EN 13501-1, indicating limited flame spread and low smoke. The exact class is grade-dependent; we confirm the certified classification for the specified product at enquiry. ### Will the colour fade outdoors? The boards are UV-stabilised. As with most composite façades there is a slight initial tonal settling in the first weeks, after which the colour holds stable. We can provide samples so you can assess the finish before ordering. ### Is the cladding genuinely termite and rot proof? Yes — the polymer-bound composite offers no food source for termites or wood-boring insects and will not rot, making it well suited to fencing, base courses and humid climates. ### How much movement should be allowed at joints? WPC moves with temperature, so expansion gaps at board ends and abutments are essential. The technical data sheet gives the exact gap and batten spacing for the profile and your local temperature range. ### Can you match a specific colour or profile? Stock tones and profiles ship quickly; bespoke colours, profiles and cut lengths are produced to order. Share your specification or a reference and we will advise on feasibility, minimum quantities and lead time. ### What documentation is provided for export and specification? Each order includes the TDS, EN 13501-1 fire classification, EN 15534 test references, Declaration of Performance / CE documentation, warranty and care-and-fixing guidance, with full shipping and customs paperwork for international delivery. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-solid-cladding --- # WPC Hollow Cladding > Lighter boards, faster spans. WPC Hollow Cladding is a hollow-section wood-plastic composite board engineered for exterior façades, ceilings and soffits where structural load and installation speed both matter. The hollow core removes material from the centre of the profile, cutting weight per square metre against a solid board of the same footprint while retaining the dense, weatherproof composite skin that gives WPC its durability. The result is a board that spans further between battens, lightens the dead load on the supporting structure and lifts faster on site. Formed from a homogeneous blend of wood flour and high-density polyethylene with UV stabilisers and processing additives, the composite resists moisture ingress, fungal attack and the splitting, warping and annual upkeep associated with natural timber. The embossed wood-grain face presents a warm, authentic timber appearance that holds its colour and texture through repeated wet-dry and freeze-thaw cycles. Supplied to representative EN and ASTM benchmarks for weathering, dimensional stability and reaction to fire, WPC Hollow Cladding is delivered with full technical documentation and is supplied across Europe, North America and beyond. It is well suited to ventilated rainscreen façades, canopy linings and covered external ceilings where a low-maintenance, dimensionally stable cladding is required at reduced weight. ## Technical specifications - Core: Hollow chambered section - Material: Wood-plastic composite (wood flour + HDPE) - Finish: Embossed wood grain - Use: Exterior grade / ventilated façade - Typical board width: 148–219 mm (profile dependent) - Typical board thickness: 21–26 mm - Typical length: 2.9 m / 3.6 m / 5.8 m - Typical density: approx. 1.10–1.25 g/cm³ - Typical weight: approx. 4.5–6.0 kg/m² (hollow section) - Water absorption (24 h): typically < 2% - Reaction to fire: typically Class D-s2,d0 to EN 13501-1 - Thermal expansion: typically 30–50 × 10⁻⁶ /K (linear) - Thermal conductivity: typically approx. 0.20–0.30 W/m·K - Fixing: Concealed clip / open-joint over batten - Service temperature: approx. −30°C to +60°C - Packaging: Banded bundles, palletised and shrink-wrapped - Category: WPC Cladding (https://construction.techservesolutions.in/materials/category/wpc-cladding) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; WPC cladding typically classified in the Euroclass system (representative Class D-s2,d0). - EN 14915: Solid wood and wood-based panelling and cladding for interior and exterior wall and ceiling finishes — performance characteristics and conformity. - EN 13986: Wood-based panels for use in construction — characteristics, evaluation of conformity and marking, supporting CE compliance. - ASTM D7032: US standard specification for establishing performance ratings (flexural, slip resistance, weathering) of wood-plastic composite deck and cladding products. - ISO 9001: Quality management systems governing the manufacturing and inspection processes behind consistent board production. ## Applications - Façade cladding: Lightweight ventilated rainscreen boards for external walls, reducing dead load on the supporting structure while delivering a durable weatherproof skin. - Ceilings & soffits: Covered external ceilings and roof soffits where the reduced board weight eases overhead fixing and supports wider batten spacing. - Partitions: Screening and external partition walls that benefit from a low-maintenance, dimensionally stable composite surface. - Canopies: Linings to canopies, walkways and entrance porches exposed to weather but sheltered from continuous standing water. - Balcony & terrace screening: Vertical privacy and wind screening to balconies and terraces where a warm timber appearance is wanted without timber upkeep. ## Features & benefits - Lightweight: The hollow core removes core material to lower weight per square metre, reducing structural load and easing handling on site. - Fast to fix: Concealed clip and open-joint detailing over battens allows rapid, repeatable installation with minimal visible fixings. - Weatherproof: The dense composite skin resists moisture, freeze-thaw cycling and fungal attack for reliable exterior performance. - Low maintenance: No painting, staining or sealing is required; periodic washing keeps the wood-grain face clean and presentable. - Dimensionally stable: Engineered composition limits the swelling, splitting and warping common to natural timber cladding. - Wider spans: Lighter sections and rigid profiles support wider batten centres than equivalent solid boards, reducing substructure quantities. ## Installation & handling - Fix vertically or horizontally over a ventilated batten substructure, maintaining an air gap and drainage path behind the boards. - Set batten centres in line with the project specification; the hollow section allows wider centres than solid boards but observe the stated maximum span. - Leave expansion gaps at board ends and around openings to accommodate thermal movement; do not pin boards rigidly at both ends. - Use the recommended concealed clips and corrosion-resistant stainless fixings; pre-drill where boards are face-fixed to avoid splitting at ends. - Support and seal exposed open ends with end caps or trims to keep debris and standing water out of the hollow chambers. - Acclimatise boards flat and protected on site before installation, and store bundles off the ground on level bearers. ## Variants & finishes - Finish: Embossed wood grain (matt) - Profile: Plain face and grooved/wide-rib hollow sections - Colour range: Teak, Walnut, Coffee, Grey and Charcoal (representative) - Jointing: Concealed clip (open-joint) or tongue-and-groove - Width options: 148 mm / 168 mm / 219 mm (profile dependent) - Length options: 2.9 m / 3.6 m / 5.8 m ## Quality & supply Standard finishes and popular profiles are typically held in stock for prompt despatch, while bespoke colours, profiles and cut lengths are produced to order on a made-to-order lead time confirmed at enquiry; representative samples and colour swatches are available ahead of commitment. Every consignment is supplied with full technical documentation — Technical Data Sheet (TDS), reaction-to-fire and weathering test reports, declaration of performance for CE marking and a product warranty — and we supply across Europe, North America and beyond with complete export paperwork, including commercial invoice, packing list and certificate of origin, to support customs clearance worldwide. ## Frequently asked questions ### How much lighter is the hollow board than a solid WPC board? The hollow chambered section removes core material, so weight typically falls to around 4.5–6.0 kg/m² against a heavier solid board of the same footprint, reducing dead load and easing handling. ### Can it span wider batten centres than solid cladding? Yes. The rigid hollow profile generally permits wider batten centres than an equivalent solid board, which can reduce substructure quantities; always work to the maximum span stated for the chosen profile. ### Is it suitable for fully exposed, rain-soaked façades? It is exterior grade and weatherproof, ideal for ventilated rainscreen façades, canopies and soffits. Ensure ventilation behind the boards and cap exposed ends so water does not stand in the hollow chambers. ### What fire classification does it carry? WPC cladding of this type is typically classified around Class D-s2,d0 to EN 13501-1. Where a higher class is specified, request the test report for the exact profile and confirm against the project fire strategy. ### Does the colour fade outdoors? UV stabilisers are included to limit fading. A degree of initial colour settling is normal in the first months of exposure, after which the wood-grain finish remains stable; no painting or sealing is required. ### How should the open ends of the hollow sections be finished? Use matching end caps or trims to close exposed ends. This keeps debris, insects and standing water out of the chambers and gives a clean, finished edge at openings and board terminations. ### What documentation is provided for export and compliance? Each order ships with a TDS, reaction-to-fire and weathering test reports, a declaration of performance for CE marking, a warranty and full export paperwork (commercial invoice, packing list and certificate of origin). ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-hollow-cladding --- # WPC Decking > Barefoot-friendly outdoor floors. WPC decking from TSS brings the warmth of natural timber to outdoor floors without the maintenance that real wood demands. Engineered from a blend of reclaimed wood fibre and high-density polyethylene, each plank is moulded with a deep wood grain and a textured, anti-slip surface that stays comfortable underfoot — barefoot-friendly around pools, splinter-free on balconies and steady in the wet. Unlike solid timber, the composite will not warp, rot, crack or feed mould, and it shrugs off the cycle of sun and rain that defeats ordinary decking. A UV-stable formulation holds colour across teak, walnut, grey and charcoal tones, while the homogeneous core resists swelling and water ingress so the boards stay flat and true season after season. Supplied across Europe, North America and beyond to EN 15534, ISO 9001 and CE requirements, our WPC decking is specified for balconies, terraces, pool surrounds and rooftop sit-outs where appearance, safety and longevity all matter. Full technical documentation, samples and test reports accompany every order. ## Technical specifications - Plank profile: 150 × 25 mm - Standard length: 2200 mm - Composition: 60% wood fibre + HDPE polymer - Surface finish: Brushed / grooved anti-slip wood grain - Colours: Teak · walnut · grey · charcoal - Density (typical): 1.20–1.35 g/cm³ - Water absorption (typical): ≤ 2% (24 h immersion) - Slip resistance: Class R11 / pendulum PTV ≥ 36 (wet) - Reaction to fire: Class Bfl-s1 to EN 13501-1 (typical) - Linear thermal expansion (typical): ≈ 40–60 × 10⁻⁶ /K - Flexural strength (typical): ≥ 20 MPa - Anti-slip rating: DIN 51097 Class C (barefoot, wet) - Service temperature: −30°C to +60°C - Weight per plank (typical): ≈ 4.0–4.5 kg - Profile type: Solid / hollow-core (project dependent) - Packaging: Strapped bundles, palletised and film-wrapped - Category: WPC Cladding (https://construction.techservesolutions.in/materials/category/wpc-cladding) ## Standards & compliance - EN 15534: Composites made from cellulose-based materials and thermoplastics (WPC) — defines characterisation, performance and decking profile requirements. - EN 13501-1: Reaction-to-fire classification for construction products, including the Bfl/Cfl floor-covering classes applied to decking. - DIN 51097: Slip resistance of wet barefoot areas (Classes A/B/C) — relevant to pool surrounds and balconies. - DIN 51130 / R-rating: Slip resistance of workplace and pedestrian floor surfaces (R9–R13) measured on the inclined ramp. - ISO 9001: Quality management system governing consistent manufacture, traceability and documentation. ## Applications - Balconies & terraces: A warm, low-maintenance floor for apartment balconies and private terraces that stays splinter-free underfoot. - Pool surrounds: Anti-slip, barefoot-rated boards that stay cool and secure in constantly wet, chlorinated conditions. - Garden decks: Rot- and insect-resistant decking for raised garden platforms, walkways and outdoor lounging areas. - Rooftop sit-outs: UV-stable planking for exposed rooftop terraces and sky decks that endure full sun and rain. - Hospitality & resort decks: Durable, uniform finishes for hotel poolsides, cabana decks and spa terraces with heavy foot traffic. ## Features & benefits - Anti-slip: Grooved, textured surface delivers reliable wet grip for safe footing around water and on balconies. - UV resistant: Light-stabilised formulation resists fading so colour stays consistent under prolonged sun exposure. - Splinter-free: The composite surface never splinters or cracks, keeping decks comfortable for bare feet and children. - Eco-friendly: Made from reclaimed wood fibre and recyclable polymer, reducing reliance on virgin hardwood. - Weatherproof: Low water absorption means the boards will not rot, warp or swell through repeated wet-dry cycles. - Low maintenance: No painting, oiling or sealing required — periodic washing keeps the finish looking new. ## Installation & handling - Fix to a level joist substructure with concealed clips and stainless fasteners; recommended joist centres of 300–400 mm for residential loading. - Leave expansion gaps at board ends and perimeters (typically 4–6 mm) to accommodate thermal movement over the temperature range. - Ensure a continuous fall and free drainage beneath the deck; maintain ventilation gaps so the underside dries between wettings. - Acclimatise boards on site before installation and stagger end joints across adjacent rows for a balanced appearance. - Store flat on bearers, fully supported and protected from prolonged direct sun until laid; handle on edge to avoid surface scuffing. ## Variants & finishes - Teak: Warm golden-brown wood tone - Walnut: Deep rich-brown wood tone - Grey: Contemporary neutral grey - Charcoal: Dark anthracite finish - Profile: Solid or hollow-core, 150 × 25 mm - Surface: Brushed wood-grain or fine-grooved anti-slip ## Quality & supply Popular colours and the standard 150 × 25 mm profile are typically held in stock for prompt despatch, with bespoke colours, lengths and surface textures produced to order on a short manufacturing lead time confirmed at enquiry; physical samples and colour swatches are available ahead of commitment, and every consignment ships with full documentation — Technical Data Sheet, reaction-to-fire and slip-resistance test reports, ISO 9001 certification, CE declaration and product warranty — supported by export-ready packaging and complete shipping paperwork for delivery across Europe, North America and beyond. ## Frequently asked questions ### Is WPC decking safe to use barefoot around a swimming pool? Yes. The textured, grooved surface is rated for wet barefoot areas (DIN 51097 Class C, typical) and is splinter-free, so it stays grippy and comfortable around pools. ### Will the boards fade or discolour in strong sun? The decking uses a UV-stabilised formulation that resists fading. A slight, even mellowing can occur in the first months of exposure, after which the colour remains stable. ### How much expansion gap should I allow when installing? Allow roughly 4–6 mm at board ends and perimeters, and follow the recommended joist centres of 300–400 mm. Exact gaps depend on board length and site temperature at the time of fixing. ### Does the decking need oiling, sealing or painting? No. Unlike timber, it requires no oiling, sealing or painting — periodic washing with water is enough to keep the surface looking new. ### What is the fire classification of the decking? It typically achieves Class Bfl-s1 reaction to fire under EN 13501-1. Classified test reports are issued with each order; confirm the project-specific requirement at enquiry. ### Can you match a specific colour or plank length for a project? Yes. Beyond our stocked teak, walnut, grey and charcoal, bespoke colours, lengths and surface textures are produced to order on a short lead time, with samples supplied for approval first. ### Do you supply and ship internationally with documentation? Yes. We supply across Europe, North America and beyond, with export-ready packaging and full paperwork — TDS, test reports, ISO 9001, CE declaration and warranty — accompanying every shipment. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-decking --- # WPC Blade Louver > Shade and rhythm on the façade. WPC blade louvers bring shade and visual rhythm to the building envelope. Each blade is extruded from wood-plastic composite — a stable blend of wood fibre and polymer that holds its line where natural timber would warp, split or grey. Set vertically or horizontally across glazing, walkways and plant rooms, the profile filters direct sun, screens services from view and gives the elevation a deliberate, repeating cadence. The composite is engineered for exterior service. It resists rain, UV and humidity without the seasonal sanding, oiling or repainting that solid wood demands, and the colour runs through the body of the blade rather than sitting on the surface. Blades carry on a concealed support system, so spans align cleanly and the fixing line stays hidden from the street. Supplied as a coordinated system of blades, carriers and trims, the louver is straightforward to set out and quick to install. We supply WPC blade louvers across Europe, North America and beyond, with samples, technical data and full export documentation to support specification and approval on each project. ## Technical specifications - Profile: Blade - Material: Wood-plastic composite (WPC) - Finish: Through-coloured wood tones - Use: Exterior grade - Density (typical): 1.20-1.40 g/cm3 - Blade depth (typical): 50-100 mm - Blade thickness (typical): 20-30 mm - Standard length (typical): 2.9 m / 5.8 m - Thermal conductivity (typical): ~0.20 W/m·K - Linear thermal expansion (typical): ~50 x 10^-6 /K - Water absorption (typical): <2% by mass (24 h) - Reaction to fire (typical): Class D-s2,d0 to EN 13501-1 - UV / weathering: Colour-stabilised for exterior exposure - Weight (typical): ~3.5-5.0 kg/m run, profile dependent - Support system: Aluminium carrier with concealed fixings - Packaging: Bundled, film-wrapped on timber pallets - Category: Louvers (https://construction.techservesolutions.in/materials/category/louvers) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; WPC blades typically declared in Euroclass (e.g. D-s2,d0). - EN 15534 / ISO 16616: Wood-plastic composite (WPC) profiles — characterisation, requirements and test methods for composites used in cladding and exterior applications. - ASTM D7032: Establishing performance ratings for wood-plastic composite deck and exterior profiles (flexural, weathering and durability). - CE marking: Declaration of performance and conformity for construction products placed on the EU/EEA market. - ISO 9001: Quality management system governing manufacture, traceability and consistent product quality. ## Applications - Façade sun-shading: Blades break direct solar gain across glazed elevations, reducing glare and cooling load while keeping daylight and views. - Plant screening: Vertical or horizontal blades conceal rooftop and ground-level services without trapping airflow. - Pergolas and canopies: Lightweight blades form shaded overhead structures and walkway covers with a warm timber appearance. - Boundary and privacy screens: Aligned blade runs define site boundaries and screen sightlines while admitting light and ventilation. - Balcony and terrace screens: Provides privacy and wind filtering to balconies and terraces with a coordinated façade finish. - Brise-soleil bands: Horizontal blade arrays act as brise-soleil to shade upper storeys and articulate the elevation. ## Features & benefits - Controls solar gain: Blade spacing and orientation are set to cut direct sun and glare while preserving daylight and outward views. - Modular spans: Standard blade lengths and carriers set out quickly into long, even runs with consistent alignment. - Weatherproof and low-maintenance: Resists rain, UV and humidity without the sanding, oiling or repainting that solid timber requires. - Architectural rhythm: Repeating blades give the elevation a strong, deliberate cadence and a natural wood appearance. - Concealed fixing: Aluminium carriers and hidden brackets keep the fixing line out of view for a clean finish. - Through-coloured body: Colour runs through the composite, so minor scuffs and edge cuts stay visually consistent. ## Installation & handling - Acclimatise blades on site, laid flat and supported, before fixing to allow temperature equalisation. - Set out the aluminium carrier system first; check level, plumb and consistent blade centres before loading blades. - Leave expansion gaps at blade ends and run terminations to accommodate thermal movement of the composite. - Fix only with the carriers, brackets and stainless fasteners specified for the system; do not face-screw blades randomly. - Support long spans with intermediate carriers per the layout to prevent deflection and keep lines true. - Cut with carbide-tipped blades; de-burr cut ends and keep drainage paths clear at sills and bases. ## Variants & finishes - Profile: Blade — flat and angled (airfoil) options - Blade depth: 50, 75 or 100 mm (profile dependent) - Orientation: Vertical fins or horizontal brise-soleil - Wood tones: Teak, walnut, oak, grey and charcoal - Finish texture: Brushed / wood-grain embossed - Length: 2.9 m and 5.8 m standard; cut-to-size on request ## Quality & supply Stock profiles and popular wood tones typically ship within a short lead time, while made-to-order colours, blade depths and cut-to-size runs are produced to programme on confirmed quantities; physical samples and colour references are available before commitment. Every consignment is supplied with a technical data sheet, applicable reaction-to-fire and WPC performance test reports, a declaration of performance for CE marking and a product warranty, and we export worldwide — across Europe, North America and beyond — with full commercial and shipping documentation to support customs clearance and project approval. ## Frequently asked questions ### Will the blades fade or warp outdoors? The composite is colour-stabilised and dimensionally stable for exterior service. Some gentle, even mellowing of tone can occur with prolonged UV exposure, but the blades resist the warping, splitting and greying typical of untreated solid timber. ### What fire classification do the blades carry? WPC blades are typically declared to EN 13501-1, with a representative reaction-to-fire class of D-s2,d0. We can confirm the exact class against the finish and project requirement and provide the supporting test report. ### Can blade spacing and orientation be tuned for shading? Yes. Blade depth, centres and orientation (vertical fins or horizontal brise-soleil) are selected to achieve the required solar cut-off and privacy while retaining daylight and views. ### How are the louvers fixed and are the fixings visible? Blades carry on an aluminium support system with concealed brackets and stainless fasteners, so the fixing line stays hidden. Carrier centres are set out to suit blade length and wind loading. ### What lengths and finishes are available? Standard lengths are typically 2.9 m and 5.8 m, with cut-to-size on request. Finishes include a range of wood tones and greys in brushed or wood-grain embossed textures. ### How much maintenance do the blades need? Routine cleaning with water and a mild detergent is generally all that is required. No sanding, oiling or repainting is needed, unlike natural timber louvers. ### Do you supply outside Europe and provide documentation? Yes. We supply across Europe, North America and beyond, and every order ships with a technical data sheet, test reports, declaration of performance and full export documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-blade-louver --- # WPC Square Louver > Clean square-section grid. The TSS WPC Square Louver is a wood-plastic composite profile with a clean, equal-sided square section, engineered to build crisp linear grids across ceilings, partitions and feature screens. Spaced on a regular pitch, the square bars read as a calm, contemporary rhythm that organises a space, conceals ductwork, lighting tracks and services overhead, and filters daylight or artificial light without fully closing the plane. The composite construction pairs the warmth and grain of timber with the dimensional stability of a polymer matrix, so the finished grid holds its line where natural wood would move. Manufactured from a homogeneous blend of wood fibre and virgin polymer with UV stabilisers and coupling agents, the louver resists moisture, splitting and insect attack and carries its colour through the section rather than as a surface coat. This makes it suitable for interior schemes and for sheltered exterior applications such as soffits and covered façades, where it weathers predictably and needs no painting or sealing. Surfaces arrive in a range of natural wood tones with a fine embossed grain. Supplied to TSS Building Material Division across Europe, North America and beyond, the WPC Square Louver ships with full technical documentation and is dimensioned to mount quickly onto battens, sub-frames or proprietary track. Sections, pitches and tones are coordinated for repeatable, low-tolerance installation on projects of any scale. ## Technical specifications - Profile: Square section - Material: Wood-plastic composite (WPC) - Composition: Wood fibre + virgin polymer, UV-stabilised (typical) - Section size: 50 x 50 mm typical (40 x 40 / 30 x 30 mm options) - Standard length: 2.9 m typical (custom cut to order) - Density: 1.20–1.35 g/cm³ (typical) - Reaction to fire: Class D-s2,d0 to EN 13501-1 (typical) - Water absorption: ≤ 2% by weight, 24 h immersion (typical) - Thermal conductivity: ≈ 0.20–0.30 W/m·K (typical) - Linear thermal expansion: ≈ 40–60 x 10⁻⁶ /K (typical) - Surface finish: Fine embossed wood grain, through-colour - Weight per unit: ≈ 2.0–2.6 kg per metre (50 x 50 mm, typical) - Service use: Interior and sheltered exterior - Maintenance: No painting or sealing; wipe clean - Packaging: Banded bundles, film-wrapped on pallets - Category: Louvers (https://construction.techservesolutions.in/materials/category/louvers) ## Standards & compliance - EN 15534: Composites made from cellulose-based materials and thermoplastics (WPC) — characteristics and test methods for profiles and cladding. - EN 13501-1: Reaction-to-fire classification of construction products; WPC profiles of this class typically achieve Euroclass D-s2,d0. - EN ISO 16474 / ASTM G154: Accelerated weathering and UV exposure test methods used to verify colour and surface durability for exterior use. - CE marking: Declaration of conformity to the applicable harmonised requirements for placing the product on the European market. - ISO 9001: Quality management system governing manufacturing, inspection and traceability of supplied material. ## Applications - Ceiling features: Suspended square-bar grids that define zones overhead while concealing ducting, sprinkler runs and lighting tracks. - Room dividers: Free-standing or floor-to-ceiling screens that separate spaces without blocking light or sightlines. - Reception screens: Feature backdrops and counter screens that give arrival areas a warm, contemporary timber rhythm. - Soffits: Sheltered external undersides and covered walkways where a weather-stable grid finishes the eave or canopy. - Feature walls: Vertical batten-grid panels that add depth and texture to lobbies, corridors and retail fit-outs. ## Features & benefits - Crisp grid: Equal square sections sit on a regular pitch to read as a clean, precise linear pattern. - Hides services: The open grid masks ductwork, wiring and fixings while keeping access from above. - Durable: Moisture-, split- and insect-resistant composite holds its shape far better than natural timber. - Quick to mount: Consistent sections fix rapidly to battens, sub-frames or proprietary track with minimal cutting. - Through-colour: Wood tone runs through the section, so knocks and cut ends stay discreet and need no painting. ## Installation & handling - Acclimatise bundles flat on site for 24–48 hours before fixing, and leave a small expansion gap at runs and abutments to absorb thermal movement. - Mount onto a true, level batten or sub-frame at regular centres; pre-drill and use corrosion-resistant fixings, allowing clearance holes for movement on longer runs. - Set out the grid pitch from a datum line and work to a story pole so spacing stays consistent across the full plane. - Cut with fine-tooth carbide blades for clean square ends; de-burr edges before assembly. - For sheltered exterior use, ensure the sub-frame is ventilated and drained, and keep profiles clear of standing water. - Wipe finished surfaces with a mild detergent and soft cloth; no sealing, oiling or painting is required. ## Variants & finishes - Section size: 30 x 30 / 40 x 40 / 50 x 50 mm - Wood tones: Teak, Walnut, Oak, Coffee, Charcoal - Surface: Fine embossed grain - Length: 2.9 m standard; cut to order - Pitch: Coordinated centres for ceiling or wall grids ## Quality & supply Stock tones and standard sections typically dispatch within 7–10 working days, while bespoke sizes, pitches and colour matches are made to order on a 3–4 week lead time; physical samples and tone swatches are available for approval before commitment. Every consignment ships with full documentation — a Technical Data Sheet, reaction-to-fire and weathering test reports, a Declaration of Performance with CE marking and a product warranty — and TSS Building Material Division supplies the WPC Square Louver across Europe, North America and beyond with complete export paperwork for each shipment. ## Frequently asked questions ### Can the WPC Square Louver be used outdoors? Yes, in sheltered exterior positions such as soffits, canopies and covered façades. The UV-stabilised, through-colour composite weathers predictably; it should be installed on a ventilated, drained sub-frame and kept clear of standing water. ### What section sizes and lengths are available? A 50 x 50 mm square section in 2.9 m standard lengths is typical, with 40 x 40 mm and 30 x 30 mm options. Profiles can be cut to order, and grid pitch is coordinated to your setting-out. ### What is the fire classification? WPC profiles of this class typically achieve Euroclass D-s2,d0 to EN 13501-1. The applicable classification report is issued with each order; confirm the rating required by your project specification when requesting a quote. ### Does it need painting, sealing or oiling? No. The wood tone runs through the section and the surface is finished as supplied, so the louver needs no painting, sealing or oiling — only an occasional wipe with mild detergent. ### How is it fixed and does it expand? It mounts onto battens, a sub-frame or proprietary track with corrosion-resistant fixings. WPC has measurable thermal movement, so leave expansion gaps and use clearance holes on longer runs as set out in the installation notes. ### Can you match a specific wood tone? Standard tones include Teak, Walnut, Oak, Coffee and Charcoal, and bespoke colour matching is available to order. Request swatches for approval before placing a production order. ### Do you supply outside Europe and provide documentation? Yes. TSS Building Material Division supplies across Europe, North America and beyond, and every shipment includes the Technical Data Sheet, test reports, Declaration of Performance with CE marking, warranty and full export documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-square-louver --- # WPC Rectangular Louver > Bold horizontal lines. WPC Rectangular Louver is engineered for designers who want bolder rhythm and longer clear spans than a slim batten can give. The flat-faced rectangular profile casts strong, well-defined shadow lines across a façade through the day, reading as a confident horizontal grain on entrances, screens and balustrade infills. Built from wood-plastic composite, it pairs the warmth of timber tones with the dimensional stability and weather resistance of a polymer matrix. Because the section is deeper and wider than a standard square batten, fewer pieces are needed to close a given area, which speeds installation and keeps the supporting framework economical over large elevations. The material is colour-consistent through the profile, resists splitting, warping and insect attack, and needs no painting, staining or sealing once fixed — only occasional washing to keep the surface fresh. Supplied to representative EN and ASTM performance criteria with CE marking and a documented quality system, the louver is delivered across Europe, North America and beyond as a complete screening solution with fixing guidance, matched accessories and full technical documentation. ## Technical specifications - Profile: Rectangular, flat-faced - Material: Wood-plastic composite (WPC) - Typical section: Approx. 50 x 30 mm to 100 x 40 mm - Standard length: Typical 2.9 m / 3.6 m (cut-to-size on request) - Density: Typical 1.20-1.40 g/cm3 - Water absorption: Typical <2% (24 h immersion, EN 317 method) - Thermal conductivity: Typical 0.20-0.30 W/m.K - Coefficient of thermal expansion: Typical 30-50 x 10^-6 /K (allow movement gaps) - Reaction to fire: Typical Class E (EN 13501-1); B-s1,d0 grade available - Surface finish: Embossed wood-grain / brushed matt - Colour range: Walnut, teak, oak, charcoal and grey wood tones - UV / weather resistance: Exterior grade; colour-stabilised polymer matrix - Weight per unit: Typical 2.0-3.5 kg per linear metre (section-dependent) - Fixing: Concealed clips or face-fix to aluminium / steel sub-frame - Packaging: Bundled, film-wrapped on timber pallets; export crating available - Category: Louvers (https://construction.techservesolutions.in/materials/category/louvers) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; this louver is typically supplied to Class E, with a B-s1,d0 grade available on request. - EN 15534 (1 & 5): Wood-plastic composites (WPC) for construction — material characterisation and requirements for profiles and cladding/decking applications. - ISO 9001: Quality management system governing manufacture, inspection and documentation for consistent, traceable supply. - CE marking: Conformity with the applicable European product and construction-product requirements for placing on the EEA market. - ASTM D7032: Performance rating method for WPC products (mechanical and durability classification) for North American specification. ## Applications - Façade screening: Wide rectangular sections close large elevations efficiently while delivering strong, architectural shadow lines. - Entrance features: A bold horizontal screen frames lobbies and main doorways with a warm timber-tone finish. - Car-park screens: Durable, low-maintenance louvers provide ventilated visual screening for decks and parking structures. - Balustrade infills: Horizontal louver fields create privacy and rhythm to balconies, terraces and walkway edges. - Boundary and plant screens: Conceals services, bin stores and compounds with a clean, weatherproof finish. ## Features & benefits - Wide spans: The deeper, wider section bridges greater distances so fewer members and less framework are required. - Strong shadow lines: Flat rectangular faces cast bold, defined shadows that shift with the sun for a dynamic elevation. - Weatherproof: The colour-stabilised composite resists moisture, rot, warping and insect attack outdoors. - Low upkeep: No painting, staining or sealing — an occasional wash keeps the surface looking fresh. - Colour-consistent body: Tone runs through the profile, so cut ends and minor marks stay visually discreet. ## Installation & handling - Fix to a true, ventilated aluminium or steel sub-frame; do not mount directly onto sealed wet substrates. - Allow expansion gaps at member ends and abutments to accommodate thermal movement of the composite. - Use concealed clips or manufacturer-recommended stainless fixings; pre-drill and avoid over-tightening face fixings. - Set consistent gaps between louvers with spacers to keep shadow lines even across the run. - Support long spans at recommended centres to prevent deflection and maintain a flat, aligned face. - Store flat, bundled and supported off the ground; protect from prolonged point loads before fixing. ## Variants & finishes - Profile depth: Standard rectangular and deep rectangular sections - Wood tones: Walnut, teak and oak - Neutral tones: Charcoal and grey - Surface: Embossed wood-grain or brushed matt - Length: Standard mill lengths or cut-to-size - Fire grade: Standard Class E or upgraded B-s1,d0 ## Quality & supply Popular profiles, lengths and wood tones are typically held in stock for short lead times, while bespoke sections, colours, fire-rated grades and cut-to-size orders are produced to order with indicative lead times confirmed at enquiry; representative samples and finish swatches are available before commitment. Every consignment is supported by full documentation — technical data sheet, reaction-to-fire and WPC performance test reports, CE declaration and a product warranty — and is delivered with appropriate export crating across Europe, North America and beyond, with complete shipping and conformity paperwork. ## Frequently asked questions ### How large a span can the rectangular louver cover? The deeper rectangular section spans further than a slim batten; exact unsupported spans depend on the profile chosen, so we confirm framework centres and section against your elevation at enquiry. ### Do the louvers need painting or sealing? No. The wood-plastic composite is finished and colour-stable from manufacture; it requires no painting, staining or sealing — only periodic washing. ### What is the fire performance? Profiles are typically supplied to Class E under EN 13501-1, with an upgraded B-s1,d0 grade available where the project specification requires it. ### Are the louvers suitable for exterior and coastal use? Yes. They are exterior grade with a colour-stabilised polymer matrix that resists moisture, UV, rot and insect attack; stainless fixings are recommended in marine environments. ### Can profiles be cut to size and which colours are available? Yes — lengths can be supplied cut-to-size, and standard tones include walnut, teak, oak, charcoal and grey, with embossed or brushed matt surfaces. ### How are the louvers fixed? They mount to a ventilated aluminium or steel sub-frame using concealed clips or recommended stainless fixings, with expansion gaps and even spacing for consistent shadow lines. ### Do you supply outside Europe and provide documentation? Yes. We supply across Europe, North America and beyond with full documentation — TDS, test reports, CE declaration and warranty — and appropriate export packaging. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/wpc-rectangular-louver --- # uPVC Casement Window > Wide views, tight seal. Our uPVC casement windows pair wide, uninterrupted views with a genuinely weather-tight seal. Side-hung sashes open fully on robust friction stays, while multi-chambered profiles and reinforced corners give the frame the rigidity to carry large glass areas without distortion. The result is a window that feels solid in the hand and stays true through years of daily use. Multi-chambered uPVC and a continuous EPDM gasket system work together to keep heat in and weather out. Air pockets within the profile slow heat transfer, the gaskets close every joint against wind-driven rain, and double glazing lifts both thermal and acoustic performance so rooms stay warmer and noticeably quieter. Steel reinforcement is incorporated where spans demand it, and multi-point locking draws the sash evenly onto the seal at every closing point. Manufactured to EN 14351-1 and built on profiles certified to EN 12608, these windows are supplied across Europe, North America and beyond, with CE marking and full technical documentation. Finishes range from classic white to woodgrain foils and bespoke RAL colours, giving specifiers a fenestration solution that suits both contemporary and traditional façades. ## Technical specifications - Window type: Side-hung casement (inward / outward opening) - Profile system: Multi-chambered uPVC, 3-5 chambers - Frame depth: 60-70 mm (typical) - Glazing options: Single, or double / insulated glass unit (IGU) - Glazing thickness: 4-28 mm (typical, profile dependent) - Reinforcement: Galvanised steel inserts to main profiles - Locking: Multi-point espagnolette with mushroom cams - Gasket: Co-extruded or EPDM, dual weather seal - Thermal transmittance (Uw): 1.0-1.4 W/m²K with double glazing (typical) - Sound reduction (Rw): Up to 32-42 dB with acoustic IGU (typical) - Air permeability: Class 4 to EN 12207 (typical) - Watertightness: Class 9A / E750 to EN 12208 (typical) - Wind resistance: Class C5 / B5 to EN 12210 (typical) - Profile colour / finish: White, woodgrain foil or RAL on request - Hardware finish: White, silver, brushed or coloured to order - Packaging: Protective film, edge guards, crated or palletised for export - Category: uPVC Windows & Doors (https://construction.techservesolutions.in/materials/category/upvc) ## Standards & compliance - EN 14351-1: Windows and external pedestrian doorsets — product standard defining performance characteristics (watertightness, air permeability, wind load, thermal and acoustic performance) and the basis for CE marking. - EN 12608: Unplasticised PVC (PVC-U) profiles for the fabrication of windows and doors — classification, requirements and test methods for profile quality, dimensions and weathering. - EN 12207 / 12208 / 12210: Test and classification standards for air permeability, watertightness and resistance to wind load respectively, against which the windows are rated. - ISO 9001: Quality management systems — applied across manufacturing and inspection to ensure consistent, traceable production. - CE marking: Declaration of conformity to EN 14351-1, confirming the product meets EU requirements for placing on the market. ## Applications - Homes & apartments: Bright, draught-free living spaces with secure multi-point locking for new-build and refurbishment housing alike. - Hospitality: Quiet, comfortable guest rooms in hotels and resorts where acoustic glazing keeps external noise out. - Offices: Thermally efficient fenestration that supports comfortable, energy-conscious commercial workspaces. - Institutional: Low-maintenance, durable windows suited to schools, healthcare and public buildings with high occupancy. - Mixed-use developments: A consistent façade solution across residential and commercial floors, with finishes matched throughout. ## Features & benefits - Thermally efficient: Multi-chambered profiles and insulated glazing reduce heat loss, helping lower heating and cooling demand. - Weather-tight: Dual gasket seals and multi-point locking close the sash evenly against wind-driven rain and draughts. - Sound reducing: Acoustic insulated glass units soften external noise for calmer, quieter interiors. - Low maintenance: uPVC will not rot, rust or need repainting — an occasional wipe keeps frames looking their best. - Secure by design: Multi-point espagnolette hardware with mushroom cams resists forced entry at every locking point. - Wide, clear views: Slim sightlines and large openable sashes maximise daylight and outlook from every room. ## Installation & handling - Store upright on edge in a dry, ventilated area; keep protective film in place until installation is complete. - Set frames plumb, level and square, packing at fixing points to avoid distorting the profile. - Fix through the frame into sound substrate at recommended centres using appropriate anchors or fixing lugs. - Seal the perimeter with a compatible weatherproof sealant and ensure correct internal/external vapour control. - Check that sashes open, close and lock smoothly, and adjust hinges and keeps before handover. - Remove protective film promptly after fitting to prevent adhesive residue under prolonged sunlight. ## Variants & finishes - Opening style: Inward-opening, outward-opening, fixed light or combination - Profile colour: White as standard - Woodgrain finishes: Golden Oak, Mahogany, Anthracite Grey woodgrain foils - RAL colours: Bespoke single or dual-colour RAL on request - Glazing: Single, double or acoustic / low-E insulated glass units - Hardware: White, silver, brushed steel or colour-matched handles ## Quality & supply Standard white casement configurations in popular sizes are typically held for shorter lead times, while bespoke dimensions, colours and glazing specifications are made to order with lead times confirmed at quotation. Samples, profile sections and corner cut-aways are available for evaluation and approval, and every order ships with full documentation — technical data sheets, the Declaration of Performance and CE marking, test reports against EN 14351-1, and product warranty. We supply across Europe, North America and beyond, with export crating, clear labelling and complete shipping documentation prepared for each consignment. ## Frequently asked questions ### What U-value can these casement windows achieve? With a standard double-glazed insulated unit, typical whole-window Uw values fall in the range of 1.0-1.4 W/m²K. The exact figure depends on the profile system, glazing make-up and spacer chosen, and is confirmed at quotation. ### Are the windows CE marked and certified? Yes. They are manufactured to EN 14351-1 on profiles certified to EN 12608 and carry CE marking with a Declaration of Performance. Test classifications for air, water and wind resistance are provided with the documentation. ### What glazing and acoustic options are available? Single glazing is available, though double or acoustic insulated glass units are recommended for thermal and sound performance. Acoustic IGUs can deliver typical Rw ratings of up to 32-42 dB depending on the configuration. ### Can the windows be supplied in colours or woodgrain finishes? Yes. White is standard, with woodgrain foils such as Golden Oak, Mahogany and Anthracite Grey, plus bespoke single or dual-colour RAL finishes available to order. ### How secure are the locking systems? Each sash uses multi-point espagnolette hardware with mushroom cams that engage the frame at several points, drawing the sash tight to the seal and resisting forced entry. Hardware finishes can be matched to the project. ### What sizes can be produced? Windows are made to order to your schedule of dimensions, with steel reinforcement specified where spans require it to maintain rigidity. Provide your opening sizes and we will confirm the optimum configuration. ### Do you export and provide full documentation? Yes. We supply across Europe, North America and beyond, with export-ready packaging and complete documentation including technical data sheets, test reports, the Declaration of Performance, CE marking and warranty. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/upvc-casement-window --- # uPVC Sliding Window > Space-saving, smooth glide. The TSS uPVC Sliding Window is engineered for openings where swing space is at a premium. Sashes glide horizontally along precision tracks rather than projecting into the room, making the window ideal for balconies, walkways and rooms where a casement or top-hung sash would obstruct furniture, circulation or external paths. Available in two- and three-track configurations, the system gives flexible ventilation control and lets a wider opening be served by panels that overlap rather than collide. The frame and sashes are formed from multi-chambered uPVC profiles that combine rigidity with built-in thermal breaks. Continuous brush-pile and bubble gaskets seal each track against wind-driven rain, fine dust and draughts, while stainless-steel rollers and a stainless track liner keep operation light and consistent over years of daily use. Glazing options run from single panes for sheltered internal screens to insulated double-glazed units for thermal and acoustic comfort. Supplied across Europe, North America and beyond, every window is manufactured to EN 14351-1 with profiles conforming to EN 12608-1, CE marked and supported by full technical documentation. An optional sliding insect mesh track integrates flush with the frame, allowing ventilation without admitting insects — particularly valued in residential and hospitality projects. ## Technical specifications - Type: Horizontal sliding (2 / 3 track) - Profile system: Multi-chambered uPVC (typ. 3–5 chambers) - Profile class: EN 12608-1 Class A wall thickness (typical) - Frame depth: Typ. 60–80 mm sliding section - Glazing: Single, or 24–28 mm insulated double-glazed unit - Glazing thickness range: Typ. 4 mm single to 28 mm IGU - Reinforcement: Galvanised steel core in main profiles - Thermal transmittance (Uw): Typ. 1.8–2.6 W/m²K (per EN ISO 10077) - Acoustic rating (Rw): Typ. 28–34 dB with DGU (per EN ISO 717-1) - Air permeability: Up to Class 3 (EN 12207) - Watertightness: Up to Class 6A / 7A (EN 12208), typical - Wind resistance: Up to Class C3 (EN 12211), typical - Sealing: Brush-pile + co-extruded gasket on all tracks - Hardware: Stainless-steel rollers, track liner & lock - Mesh option: Integrated sliding fibreglass insect track - Finish: White, woodgrain foil or RAL-matched lamination - Category: uPVC Windows & Doors (https://construction.techservesolutions.in/materials/category/upvc) ## Standards & compliance - EN 14351-1: Harmonised product standard for windows and external doorsets — declares performance for watertightness, air permeability, wind load, thermal and acoustic characteristics; basis for CE marking. - EN 12608-1: Classification, requirements and test methods for PVC-U profiles used to fabricate windows and doors, including wall-thickness classes (A/B/C) and weathering performance. - EN 12207 / EN 12208 / EN 12211: Classification of air permeability, watertightness and resistance to wind load respectively — the weather-performance classes called up by EN 14351-1. - EN ISO 10077-1/-2: Calculation of thermal transmittance (U-value) of windows, doors and shutters, covering frame and glazing contributions. - ISO 9001: Quality management system governing manufacture, inspection and traceability of the supplied units. ## Applications - Apartments: Frees up internal space in compact urban units where outward- or inward-opening sashes would be impractical. - Balcony openings: Slides clear of railings and external walkways, giving full ventilation without sashes swinging over the parapet. - Offices: Provides controllable ventilation and a clean sightline along façades and partition walls without protruding hardware. - Villas: Spans wide living-room and bedroom openings with overlapping panels for generous daylight and uninterrupted views. - Hospitality & serviced rooms: The optional insect track suits guest rooms that need airflow while keeping interiors sealed against pests. - Corridors & stairwells: Keeps circulation routes free of projecting sashes while still delivering compliant natural ventilation. ## Features & benefits - Space-saving operation: Sashes glide within the frame footprint, reclaiming the swing area a casement or hung sash would otherwise occupy. - Dust & rain sealed: Brush-pile and co-extruded gaskets on every track block wind-driven rain and fine airborne dust. - Smooth glide: Stainless-steel rollers running on a stainless track liner keep operation light and stable over long service life. - Optional insect mesh: A flush sliding mesh track admits fresh air while keeping insects out, without altering the window's clean lines. - Thermal & acoustic comfort: Multi-chamber profiles with insulated glazing reduce heat transfer and damp external noise. - Low-maintenance finish: Rigid uPVC needs no painting and wipes clean, resisting corrosion, swelling and weathering. ## Installation & handling - Set the frame plumb, level and square in the structural opening; check diagonals before fixing to ensure the sashes glide and seat evenly along the full travel. - Fix through the frame at recommended centres using appropriate anchors for the substrate, packing behind each fixing point to avoid distorting the multi-chamber profile. - Seal the perimeter with a compatible low-modulus sealant or a continuous compression tape; maintain the drainage and pressure-equalisation slots clear at the cill. - Keep the bottom track and roller path free of mortar and debris during construction; protect profiles with peelable film until handover. - Verify roller height adjustment and lock/keep engagement on commissioning so each sash latches cleanly and runs without binding. - Store and transport units upright and well supported, glazed face protected, away from prolonged direct sunlight before installation. ## Variants & finishes - Track configuration: 2-track (2 sash) or 3-track (3 sash) - Glazing: Single pane or 24–28 mm insulated double-glazed unit - Finish — White: Standard smooth white uPVC - Finish — Woodgrain: Laminated foil (oak, walnut, mahogany and similar) - Finish — RAL colour: RAL-matched lamination on request - Mesh track: With or without integrated sliding insect mesh ## Quality & supply Standard white, single- and double-glazed sliding windows in common opening sizes are typically held as stock or short-lead items, while three-track systems, laminated and RAL-matched finishes, mesh-integrated units and project-specific dimensions are made to order against confirmed schedules; representative lead times are advised at enquiry. Physical samples, corner sections and finish swatches are available for approval before production, and every order ships with a full document pack — Technical Data Sheet, EN 14351-1 Declaration of Performance, CE marking, glazing and hardware specifications, test-report references and the product warranty. We export worldwide with complete commercial and compliance documentation, including packing lists, certificates of origin and, where required, third-party test certification. ## Frequently asked questions ### What is the difference between the two-track and three-track versions? A two-track frame carries two overlapping sashes (one fixed, one sliding, or both sliding). A three-track frame adds a third channel so a wider opening can be served by three panels — useful for large spans or to accommodate an integrated mesh sash. ### Can an insect mesh be added to a sliding window? Yes. An optional fibreglass insect mesh runs on its own flush track within the frame, so you can ventilate through the open sash while the mesh keeps insects out. It can be specified at order or accommodated on the three-track profile. ### How well do sliding windows seal against rain and dust compared with casements? These units use brush-pile plus co-extruded gaskets on every track and a drained, pressure-equalised cill, typically achieving watertightness up to Class 6A–7A and air permeability up to Class 3 under EN 12208 and EN 12207 — well suited to exposed balcony and façade openings. ### What U-value and acoustic performance can I expect? With a multi-chamber profile and an insulated double-glazed unit, Uw is typically in the 1.8–2.6 W/m²K range per EN ISO 10077, and acoustic reduction is typically 28–34 dB Rw per EN ISO 717-1. Exact figures depend on glazing build-up and unit size and are confirmed per configuration. ### Are the profiles reinforced, and will the colour fade? Main profiles carry a galvanised steel core for rigidity and to support hardware loads. The uPVC is formulated for weathering resistance to EN 12608-1; white and laminated finishes are stable under sustained UV exposure and require no painting. ### What finishes and colours are available? Standard smooth white, woodgrain laminated foils such as oak, walnut and mahogany, and RAL-matched laminations on request. Samples and swatches are provided for approval before manufacture. ### Are the windows CE marked and suitable for export markets? Yes. Units are manufactured to EN 14351-1 with profiles to EN 12608-1, CE marked, and supplied across Europe, North America and beyond with full documentation including the Declaration of Performance, TDS, test-report references and warranty. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/upvc-sliding-window --- # uPVC Fixed Window > Pure daylight, no draft. The TSS uPVC Fixed Window is engineered for openings where uninterrupted daylight and clear sightlines matter more than ventilation. With no opening sash, the glazing sits directly within a slim multi-chambered uPVC frame, maximising the glass-to-frame ratio and delivering a clean, contemporary aperture that floods interiors with natural light. Because the unit is permanently sealed, there are no moving parts, gaskets under load or locking hardware to maintain — which makes it one of the most airtight, weathertight and thermally stable window types available. The multi-chambered profile traps still air to limit heat transfer, while continuous compression seals and a fully bonded glazing pocket eliminate draughts and water ingress. The result is a quiet, energy-efficient infill that performs reliably for decades with effectively no upkeep. Supplied to EN 14351-1 with CE marking, the system is specified for stairwells, façade infill panels, feature openings and high-level glazing across commercial and residential projects. TSS supplies fixed uPVC windows across Europe, North America and beyond, made to your sizes, glazing build-up and colour, with full technical documentation. ## Technical specifications - Window type: Fixed light (non-opening) - Profile system: Multi-chambered uPVC - Profile chambers: 3 to 5 (typical) - Frame depth: 60–70 mm (typical) - Glazing options: Single / double (sealed unit) - Glazing thickness: 4 mm single up to 24–28 mm IGU (typical) - Sightline: Slim - U-value (frame + glass): 1.2–1.4 W/m²K with double glazing (typical) - Air permeability: Class 4 to EN 12207 (typical) - Watertightness: Class 9A / E750 to EN 12208 (typical) - Wind resistance: Class C5 to EN 12210 (typical) - Acoustic rating: Rw 32–42 dB depending on glazing (typical) - Reinforcement: Galvanised steel inserts where required - Reaction to fire: Euroclass to EN 13501-1 (profile dependent) - Operating temperature: -20 °C to +60 °C (typical) - Finish: Smooth white, foiled woodgrain or RAL colour - Category: uPVC Windows & Doors (https://construction.techservesolutions.in/materials/category/upvc) ## Standards & compliance - EN 14351-1: Windows and external pedestrian doors — product standard governing weather performance, thermal transmittance, acoustic, load-bearing and CE-marking requirements. - EN 12608: Unplasticised PVC (PVC-U) profiles for the fabrication of windows and doors — classification, requirements and test methods for the profile itself. - EN 12207 / 12208 / 12210: Classification of air permeability, watertightness and resistance to wind load for windows. - EN 13501-1: Reaction-to-fire classification (Euroclass) of construction products applied to the uPVC profile. - ISO 9001: Quality management system governing fabrication, traceability and consistency of supply. ## Applications - Stairwells: Brings safe, even daylight to stair cores and circulation zones where opening sashes are unnecessary and access is limited. - Feature openings: Creates bold, fully glazed architectural apertures with minimal frame interruption for maximum visual impact. - Façade infill: Fills curtain-wall and panel openings as a sealed, energy-efficient glazed unit within the building envelope. - High-level glazing: Ideal for clerestory and out-of-reach positions where ventilation is not required and maintenance access is restricted. - Borrowed-light partitions: Transfers daylight between internal spaces while maintaining a fully sealed, draught-free separation. ## Features & benefits - Maximum daylight: The slim frame and high glass-to-frame ratio admit more natural light and broaden sightlines across the opening. - Fully sealed: With no opening sash, the unit achieves outstanding airtightness and watertightness for a stable, draught-free interior. - Energy efficient: Multi-chambered profiles and insulated glazing limit heat loss, supporting lower running costs and better comfort. - Slim frame: A refined, low-profile sightline keeps the aperture clean and contemporary without sacrificing strength. - Maintenance-free: No hardware, hinges or moving seals means decades of reliable service with only routine cleaning. ## Installation & handling - Verify opening dimensions and squareness before fixing; allow a consistent perimeter expansion gap for sealant and movement. - Fix through the frame into sound structure using approved frame anchors or fixing lugs at spacings appropriate to the unit size and wind load. - Pack and shim at fixing points to keep the frame straight and avoid distortion of the sealed glazing pocket. - Seal the external perimeter with a compatible low-modulus sealant over backing rod; close the internal joint to maintain the airtight line. - Handle glazed units by the frame, keep upright in transit, and protect surfaces from site contamination until handover. - Add galvanised steel reinforcement for larger spans or higher wind-load classes in line with the system specification. ## Variants & finishes - Standard colour: Smooth white - Woodgrain foils: Golden Oak, Walnut, Anthracite Grey and further finishes - RAL colours: Single or dual colour to specified RAL reference - Glazing build-up: Single glazed, double glazed or laminated / low-E units - Frame depth: 60 mm or 70 mm multi-chambered profile - Format: Made-to-measure rectangular, shaped or raked heads ## Quality & supply Stock white profile configurations are typically available on short lead times, while colour, shaped and bespoke glazing builds are made to order to your schedule of sizes. Samples, corner sections and glazing references can be provided ahead of order, and every supply is accompanied by full documentation — Technical Data Sheet, declaration of performance for CE marking, applicable EN test classifications and warranty. TSS manages export packing, marking and shipping to Europe, North America and beyond, with complete export paperwork to support smooth customs clearance and on-site verification. ## Frequently asked questions ### Can a fixed uPVC window be opened? No. A fixed light is a permanently sealed, non-opening unit. It is chosen where you want daylight and views but do not need ventilation; pair it with opening casements elsewhere if airflow is required. ### What U-values can you achieve? With a standard double-glazed sealed unit the combined frame and glass U-value is typically 1.2–1.4 W/m²K, and lower values are achievable with low-E coatings, argon fill or triple glazing. ### What glazing options are available? Single glazing for internal or sheltered positions, and double or laminated low-E sealed units up to roughly 24–28 mm for thermal, acoustic and safety performance. ### How large can a single fixed unit be? Maximum sizes depend on glazing weight, wind-load class and reinforcement. Larger apertures use galvanised steel inserts and thicker glass; we confirm achievable sizes against your wind loads at enquiry. ### Is the window suitable for high-level or hard-to-reach positions? Yes. Because there is no hardware to operate or maintain and the unit is fully sealed, fixed lights are ideal for clerestory, stairwell and other out-of-reach openings. ### Are the units CE marked and standards-compliant? Yes. Units are supplied to EN 14351-1 with CE marking, using PVC-U profiles to EN 12608, and are accompanied by the relevant air, water and wind classifications. ### Do you supply outside Europe? Yes. We supply across Europe, North America and beyond, made to your sizes and finishes, with export-ready packing and full technical and shipping documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/upvc-fixed-window --- # uPVC Doors > Sealed, secure, weatherproof. TSS uPVC doors are engineered for openings where moisture, weather and constant use defeat conventional timber. Built on rigid uPVC profiles with a 30 mm solid or insulated core, each leaf resists warping, swelling and rot — making it equally at home on a wet bathroom, an exposed balcony or a hard-working service entrance. The range spans glossy, FMD, hollow and poly-plast variants, so a single supply partner covers every opening in the building. Multi-point locking and weatherseal gaskets give a tight, secure closure that keeps wind-driven rain, draughts and noise outside. The profiles carry no risk of termite attack, need no painting and wipe clean in seconds, which is why they are specified across residential, hospitality and commercial projects where lifetime maintenance has to stay low. Manufactured to recognised international profile and door standards and CE-marked for the European market, TSS uPVC doors are supplied across Europe, North America and beyond with full technical and test documentation for specifiers, fabricators and main contractors. ## Technical specifications - Variants: Glossy · FMD · hollow · poly-plast - Profile material: Rigid uPVC (unplasticised PVC) - Core: 30 mm / solid or insulated - Locking: Multi-point, hook & roller (typical) - Leaf thickness: 30 mm (typical) - Profile wall thickness: Class A, ≥2.8 mm (typical, EN 12608) - Profile density: 1.40–1.45 g/cm³ (typical) - Water absorption: ≤0.2% after 24 h immersion (typical) - Thermal conductivity (uPVC): ~0.17 W/m·K (typical) - U-value (door assembly): 1.6–2.0 W/m²·K (typical, glazing dependent) - Acoustic rating: Rw up to ~30 dB (typical, glazing dependent) - Linear thermal expansion: ~0.07 mm/m·K (typical) - Surface finish: High-gloss, matte (FMD) or laminated woodgrain - Hardware: Stainless / zinc-alloy hinges & lockset - Packaging: Edge-protected, stretch-wrapped, palletised - Weight per leaf: ~16–24 kg (size & core dependent) - Category: uPVC Windows & Doors (https://construction.techservesolutions.in/materials/category/upvc) ## Standards & compliance - EN 12608: Unplasticised PVC (uPVC) profiles for the fabrication of windows and doors — classification, dimensions and mechanical/weathering requirements of the profile. - EN 14351-1: Windows and external pedestrian doorsets — product standard defining performance characteristics (watertightness, air permeability, wind resistance, U-value) for CE marking. - EN 1670: Building hardware — corrosion resistance grading for hinges, locks and door furniture used on the leaf. - ASTM D4726: Rigid PVC exterior-profile extrusions used for assembled windows and doors — US specification covering impact, dimensions and weatherability. - ISO 9001: Quality management systems governing manufacture, inspection and traceability of the doors and profiles. ## Applications - Bathrooms & wet areas: Waterproof, rot-proof leaves stand up to constant splash and humidity without swelling or peeling. - Balcony doors: Weatherseal gaskets and multi-point locking keep wind-driven rain and draughts out of exposed external openings. - Utility & service: Hard-wearing, low-maintenance leaves suit laundries, stores, plant rooms and back-of-house circulation. - Main doors: Solid-core glossy and laminated variants give a secure, presentable entrance with minimal upkeep. - Hospitality & residential: Consistent finishes across en-suites, balconies and utility rooms simplify specification for apartments and hotels. ## Features & benefits - Warp & rot proof: Rigid uPVC will not bow, swell or rot, so leaves stay true through years of humidity cycling. - Waterproof: Closed profiles and low water absorption make the door ideal for permanently wet environments. - Termite proof: Inorganic uPVC offers no food source, eliminating termite and borer attack common to timber. - Low maintenance: Factory-finished surfaces need no painting and wipe clean with a damp cloth. - Secure closure: Multi-point locking and weatherstrip gaskets give a tight, draught-free and secure shut. - Colour-stable finishes: UV-resistant surfaces hold gloss and woodgrain colour without yellowing or fading. ## Installation & handling - Store leaves flat or upright on edge protectors, clear of the ground and out of prolonged direct sun before fixing. - Set the frame plumb, level and square; pack at fixing points and avoid bowing the profile when tightening fasteners. - Fix into solid surrounds with corrosion-resistant screws at hinge and lock positions; do not over-torque into the uPVC. - Seal the frame-to-wall perimeter with a low-modulus weatherproof sealant to maintain the watertight line. - Check that gaskets seat fully and the leaf closes onto all locking points before handover. - Remove protective film promptly after installation to prevent adhesive residue baking onto the surface. ## Variants & finishes - Glossy: High-gloss solid-core leaf for main and feature doors - FMD: Matte fibre-finish leaf for a soft, non-reflective look - Hollow: Lightweight hollow-section leaf for bathrooms & internal wet areas - Poly-plast: Moulded poly-plast leaf for utility, service and economy openings - Finish options: High-gloss, matte or laminated woodgrain - Leaf size: Standard single-leaf openings; made-to-order sizes available ## Quality & supply Stock variants and standard sizes are typically available for prompt despatch, while bespoke sizes, colours and hardware sets are made to order on a project lead time confirmed at enquiry. Physical samples and finish swatches are available for approval before bulk commitment, and every consignment ships with full documentation — technical data sheet, applicable test reports, CE Declaration of Performance and product warranty. Supplied across Europe, North America and beyond, each order is packed for export with edge protection and palletisation, and accompanied by the complete export and compliance paperwork required for international delivery. ## Frequently asked questions ### Which variant should I specify for a bathroom? Hollow or poly-plast leaves are the usual choice for bathrooms and internal wet areas — fully waterproof and rot-proof, with glossy solid-core leaves reserved for main and feature doors. ### Are these doors suitable for external balcony openings? Yes. With weatherseal gaskets and multi-point locking they are weatherproof and draught-resistant; for fully exposed positions we supply CE-marked doorsets tested to EN 14351-1. ### Will the door warp or swell in humid conditions? No. Rigid uPVC has very low water absorption and will not warp, swell or rot, which is why it outperforms timber in permanently wet environments. ### Do the surfaces need painting or sealing? No. The leaves are factory-finished in gloss, matte or woodgrain and need only wiping clean; they are UV-resistant to hold colour without yellowing. ### What locking and hardware are fitted? Multi-point locking with corrosion-resistant stainless or zinc-alloy hinges and lockset is standard; hardware grades to EN 1670 can be specified for higher-exposure projects. ### Can sizes, colours and hardware be customised? Yes. Standard sizes ship from stock where available, while bespoke dimensions, finishes and hardware are made to order on a confirmed project lead time. ### What documentation is provided for export? Each order is accompanied by a technical data sheet, applicable test reports, CE Declaration of Performance, warranty and full export paperwork for delivery across Europe, North America and beyond. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/upvc-doors --- # Fiber Cement Board > The all-rounder substrate. Fiber Cement Board is the workhorse substrate of the modern dry-construction envelope: a high-density panel of Portland cement, fine silica and cellulose fibre, pressure-formed and autoclave-cured into a dimensionally stable sheet that neither burns, rots nor feeds termites. Supplied in 6, 8 and 12 mm thicknesses on the standard 1220 × 2440 mm format, it moves seamlessly between internal partitions, false ceilings, ventilated façade cladding and tile-backer or flooring underlay — one board, specified four ways. Unlike gypsum, fibre-cement holds its integrity through wetting and drying cycles, making it the default choice for wet areas, semi-exposed soffits and rain-screen build-ups where moisture and impact are facts of life. It is non-combustible to EN 13501-1 (typically classified A2-s1,d0) and carries an ASTM E84 Class A surface-burning rating, so it contributes nothing to fire load or smoke development in the assembly. We supply Fiber Cement Board to EN 12467, ASTM C1186 and ISO 8336, CE-marked and produced under an ISO 9001 quality system, with full technical and test documentation, to projects across Europe, North America and beyond. ## Technical specifications - Thickness: 6 · 8 · 12 mm - Sheet size: 1220 × 2440 mm - Density: 1.2–1.3 g/cm³ (typical) - Reaction to fire (EN 13501-1): A2-s1,d0 (non-combustible, typical) - Surface burning (ASTM E84): Class A — flame spread ≤25 (typical) - Bending strength: ≥ 9 N/mm² (Category 4, EN 12467, typical) - Thermal conductivity (λ): ≈ 0.25 W/m·K (typical) - Water vapour resistance (µ): ≈ 200–250 (typical) - Water absorption: ≤ 30% by mass (typical) - Moisture movement: ≤ 0.10% (saturated–dry, typical) - Composition: Portland cement, silica, cellulose fibre — 100% asbestos-free - Surface finish: Smooth sanded one face; sealed edges - Edge profile: Square edge (recessed edge to order) - Weight per sheet (8 mm): ≈ 36 kg (typical) - Packaging: Stacked on timber pallets, edge-protected, shrink-wrapped - Category: Cement Boards (https://construction.techservesolutions.in/materials/category/cement-boards) ## Standards & compliance - EN 12467: Fibre-cement flat sheets — product specification, strength categories (Class 4) and durability test methods. - EN 13501-1: Reaction-to-fire classification; fibre-cement boards typically achieve A2-s1,d0 (non-combustible, minimal smoke, no flaming droplets). - ASTM C1186: Standard specification for flat non-asbestos fibre-cement sheets, grading physical and mechanical performance for North American projects. - ISO 8336: International product standard for fibre-cement flat sheets — classification, dimensional and mechanical requirements. - CE marking / ISO 9001: CE conformity to the harmonised standard plus production under a certified ISO 9001 quality-management system. ## Applications - Partitions & drywall: Forms robust, impact- and moisture-resistant internal walls in dry and wet rooms where plasterboard would fail. - False ceilings: Provides a non-combustible, sag-free ceiling lining for corridors, soffits and service voids requiring a fire-rated plane. - External cladding: Acts as the weatherboard or rain-screen panel in ventilated façades, accepting render, paint or decorative coatings. - Flooring underlay: Delivers a stable, water-tolerant base for tile, vinyl and resilient finishes over timber or steel joists. - Tile backer: Replaces gypsum backing behind ceramics in bathrooms, kitchens and wet zones with a dimensionally stable, moisture-proof substrate. - Eaves & soffit linings: Lines semi-exposed external soffits and fascias where durability against weather and rot is essential. ## Features & benefits - Fire rated: Non-combustible to EN 13501-1 (A2-s1,d0) and ASTM E84 Class A — adds no fire load and limits smoke development. - Moisture resistant: Holds dimensional integrity through repeated wetting and drying, with no swelling, delamination or loss of strength. - Termite & rot proof: Mineral cement composition offers no food source for termites, insects, fungus or mould. - High impact strength: Dense, fibre-reinforced matrix resists knocks, abrasion and point loads far better than gypsum board. - Dimensionally stable: Low moisture movement keeps joints tight and finishes crack-free across temperature and humidity swings. - Workable on site: Scores and snaps or cuts with standard fibre-cement tooling and fixes by screw or nail without specialist plant. ## Installation & handling - Cut by score-and-snap for straight lines, or with a dust-extracted diamond/fibre-cement blade; always wear FFP-rated dust protection. - Fix to timber or light-gauge steel framing at maximum 600 mm centres with corrosion-resistant fibre-cement screws or hot-dip galvanised nails. - Keep fasteners 12–15 mm from board edges and 50 mm from corners; leave a 3–5 mm control gap between sheets for movement. - For external cladding, install over a ventilated cavity with a breather membrane and flexible jointing to shed water. - Acclimatise boards flat and dry on site before fixing; store off the ground under cover, fully supported and protected from rain. - Finish joints with cement-based jointing compound and fibreglass tape; prime cut edges before applying paint or render. ## Variants & finishes - 6 mm: Lightweight — ceilings, soffits and tile backer - 8 mm: General-purpose — partitions, drywall and cladding - 12 mm: Heavy-duty — flooring underlay and high-impact walls - Standard sheet: 1220 × 2440 mm, square edge - Surface: Smooth sanded face, ready for paint, render or tile - Recessed edge: Tapered long edges for flush-jointed finishing (made to order) ## Quality & supply Standard 6, 8 and 12 mm boards on the 1220 × 2440 mm format are held in stock for prompt despatch, while recessed-edge sheets, non-standard sizes and project-volume orders are produced to programme with indicative lead times confirmed at enquiry; physical samples and cut-sheets are available for specification and approval. Every consignment ships with a Technical Data Sheet, EN 12467 / ASTM C1186 test reports, CE Declaration of Performance and a product warranty, and we supply Fiber Cement Board across Europe, North America and beyond with complete export documentation. ## Frequently asked questions ### Is Fiber Cement Board really non-combustible, and what is its fire rating? Yes. It is classified A2-s1,d0 to EN 13501-1 (non-combustible, very low smoke, no flaming droplets) and achieves a Class A surface-burning rating to ASTM E84. It contributes no fuel to a fire and is suitable for fire-rated wall and ceiling assemblies. ### Can the board be used outdoors and in permanently wet areas? It can. Fibre-cement is moisture-proof and freeze-thaw stable, so it suits external cladding, ventilated façades, eaves soffits, bathrooms and tile-backer applications without swelling or rotting. For façades, install over a drained, ventilated cavity. ### Which thickness should I specify for each application? As a guide: 6 mm for ceilings, soffits and tile backer; 8 mm for general partitions, drywall and cladding; and 12 mm for flooring underlay and high-impact walls. Our technical team can confirm against your framing centres and loads. ### Does the board contain asbestos? No. It is 100% asbestos-free, manufactured from Portland cement, silica and cellulose fibre, and complies with the non-asbestos fibre-cement standards EN 12467, ASTM C1186 and ISO 8336. ### How is it cut and fixed on site? Straight cuts are made by score-and-snap or with a dust-extracted diamond blade; boards fix to timber or steel framing with corrosion-resistant screws or galvanised nails at up to 600 mm centres. Joints are taped and filled with cement-based compound. ### What documentation and certification do you supply? Each order ships with a Technical Data Sheet, EN 12467 and ASTM C1186 test reports, a CE Declaration of Performance and a product warranty. Production is carried out under an ISO 9001 quality system, with full export documentation provided. ### Are stock and project quantities available, and can you ship internationally? Standard 6, 8 and 12 mm boards are stocked for prompt despatch; recessed-edge and bespoke sizes are made to programme. We supply across Europe, North America and beyond, palletised and edge-protected, with complete shipping documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/fiber-cement-board --- # Calcium Silicate Board > Fire protection, A1-rated. Calcium silicate board is a lightweight, asbestos-free building panel manufactured from siliceous and calcareous materials reinforced with cellulose fibres, autoclaved under high pressure to produce a stable, mineral-bonded sheet. Classified Class A1 non-combustible to EN 13501-1, it is the panel of choice where passive fire protection is the governing requirement — steel and concrete encasement, fire-rated partitions, ductwork enclosures and protected ceiling systems. Unlike standard gypsum-based boards, calcium silicate retains its integrity at elevated temperatures and resists moisture-driven movement, making it equally suited to humid and semi-exposed internal environments. The matrix is free of asbestos and formaldehyde, and the boards are dimensionally stable across a wide service-temperature range. Surfaces accept paint, render, tile and most decorative finishes directly after standard preparation. Supplied in the standard 1220 x 2440 mm format from 6 mm upwards, with thicker gauges available for higher fire-resistance periods, our calcium silicate boards are delivered with full technical documentation and exported across Europe, North America and beyond to EN, ASTM and ISO requirements. ## Technical specifications - Thickness: 6, 8, 9, 10, 12, 15, 18, 20, 25 mm - Standard size: 1220 × 2440 mm - Reaction to fire: Class A1 / A2-s1,d0 (EN 13501-1) - Composition: Calcium silicate + cellulose fibre, asbestos-free - Dry density (typical): 850–1,050 kg/m³ (grade-dependent) - Thermal conductivity (λ): ≈ 0.16–0.25 W/m·K (typical) - Bending strength (typical): ≥ 7 MPa (transverse) - Moisture movement (typical): ≤ 0.25% (saturated to dry) - pH value: ≈ 11–12 (alkaline, non-corrosive matrix) - Service temperature: Up to ~1,000 °C (non-combustible substrate) - Surface finish: Smooth sanded, ready for paint/tile/render - Edge profile: Square edge (recessed/tapered on request) - Weight per sheet (9 mm, typical): ≈ 26–29 kg per 1220 × 2440 mm board - Asbestos / formaldehyde: Free of both - Packaging: Shrink-wrapped pallets, edge-protected, export-crated - Category: Cement Boards (https://construction.techservesolutions.in/materials/category/cement-boards) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification of construction products; supports the Class A1 / A2-s1,d0 non-combustible rating. - EN 12467: Fibre-cement / mineral-bonded flat sheets — specification, mechanical and physical performance, and test methods. - ASTM C1186: US specification for flat non-asbestos fibre-cement sheets, including density and strength classification. - EN 13501-2: Fire-resistance classification (EI/REI periods) for the assembled partition, ceiling and encasement systems. - ISO 9001: Quality management system governing consistent manufacture, inspection and traceability. ## Applications - Fire protection: Encasement of structural steel and concrete and construction of fire-rated barriers where a non-combustible substrate is mandated. - Ceiling systems: Suspended and fixed ceilings, including fire-rated and membrane ceilings in commercial and public buildings. - Duct enclosures: Smoke and ventilation duct casings requiring stability and fire integrity at elevated temperatures. - Partitions: Fire-rated and moisture-tolerant internal partition linings in offices, hospitals, transport and industrial interiors. - Service shafts & risers: Lining of vertical shafts and risers to maintain compartmentation and protect escape routes. - Semi-exposed soffits: Protected external soffits and canopies where humidity resistance and non-combustibility are required. ## Features & benefits - Non-combustible: Class A1 reaction to fire means the board contributes no fuel load and will not spread flame. - Lightweight: Lower density than mineral boards of equivalent rating eases handling and reduces structural dead load. - Asbestos-free: A safe, modern cellulose-reinforced matrix with no asbestos or formaldehyde content. - Dimensionally stable: Minimal moisture movement keeps joints tight and finishes intact in fluctuating conditions. - Moisture-tolerant: Resists swelling and degradation in humid and semi-exposed internal environments. - Versatile finish: Accepts paint, tile, render and decorative laminates directly after standard surface preparation. ## Installation & handling - Store flat on a level, dry surface with full-length bearers; never stand boards on edge unsupported. - Cut with a carbide-tipped blade or score-and-snap; work in ventilated areas and use dust extraction or respiratory protection. - Fix to steel or timber framing with corrosion-resistant screws, observing recommended edge distances and fastener centres. - Leave a control gap at board joints and perimeters to accommodate movement; reinforce and fill joints per the system detail. - For fire-rated assemblies, follow the specified layer count, board thickness and joint staggering to achieve the rated EI/REI period. - Allow boards to acclimatise to ambient conditions before fixing and decorating in heated interiors. ## Variants & finishes - Standard grade: General fire protection and lining, 6–12 mm - High-density grade: Higher strength and impact resistance for partitions and soffits - Thickness range: 6, 8, 9, 10, 12, 15, 18, 20, 25 mm - Edge profile: Square edge (standard); recessed/tapered to order - Surface: Smooth sanded, ready to decorate - Sheet size: 1220 × 2440 mm standard; cut-to-size on request ## Quality & supply Standard grades and thicknesses are typically held in stock for prompt dispatch, while high-density grades, non-standard thicknesses and cut-to-size orders are produced to order with lead times confirmed at enquiry; representative samples and full-size boards are available for evaluation and specification approval. Every consignment ships with a Technical Data Sheet, EN 13501-1 reaction-to-fire classification and supporting test reports, declaration of asbestos-free composition, CE documentation where applicable and a product warranty, and we export worldwide across Europe, North America and beyond with complete shipping and conformity documentation. ## Frequently asked questions ### Are these calcium silicate boards genuinely asbestos-free? Yes. The boards are reinforced with cellulose fibre and contain no asbestos or formaldehyde; a declaration of composition is supplied with every consignment. ### What fire rating do the boards achieve? The board itself is Class A1 / A2-s1,d0 non-combustible to EN 13501-1. The fire-resistance period (e.g. EI 60, EI 120) depends on the assembled system, board thickness and layer count. ### Can the boards be used in humid or semi-exposed areas? Yes. Calcium silicate resists moisture-driven swelling and degradation, making it suitable for humid interiors and protected semi-exposed soffits, unlike standard gypsum board. ### What thicknesses are available and which should I specify? Thicknesses run from 6 mm to 25 mm. Thinner gauges suit ceilings and linings; thicker gauges are specified for higher fire-resistance periods and structural encasement. ### How should the boards be cut and fixed on site? Cut with a carbide-tipped blade or score-and-snap using dust extraction, and fix to steel or timber framing with corrosion-resistant screws at the specified centres. ### Can the surface be tiled, painted or rendered? Yes. The smooth sanded face accepts paint, tile, render and decorative laminates directly after standard joint treatment and surface preparation. ### Do you supply internationally with full documentation? We supply across Europe, North America and beyond, with each shipment accompanied by TDS, fire classification, test reports, CE documentation where applicable and warranty. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/calcium-silicate-board --- # Cement Particle Board > Strength of cement, worked like wood. Cement Particle Board from TSS unites the structural strength and durability of mineral cement with the everyday workability of timber. Manufactured by pressing graded softwood particles within a Portland-cement matrix, each panel cures into a dense, dimensionally stable sheet that saws, drills, screws and routs with conventional joinery tools — yet behaves like a mineral building board once fixed in place. The result is a single panel that carries load, holds fixings and stands up to fire, moisture and biological attack without the limitations of plywood or standard particleboard. Because the board is cement-bound rather than resin-bound, it is inherently resistant to water, frost, fungal decay and termite attack, and contributes very little to the development of a fire. This makes it equally at home as a robust mezzanine and raised-access floor deck, as the racking layer in heavy-duty partitions, and as a weather-facing substrate behind rainscreen and rendered façade systems. Its mass also delivers a useful acoustic benefit, helping partitions and floors meet airborne and impact sound targets. Supplied to EN 634 and CE-marked under EN 13986, TSS Cement Particle Board is exported across Europe, North America and beyond with full technical documentation. We support specifiers and contractors from sample stage through to delivery, providing the data sheets, classification reports and fixing guidance needed to detail the board with confidence in both interior and exterior applications. ## Technical specifications - Nominal thickness: 12 mm (also 8–40 mm) - Standard sheet size: 1220 × 2440 mm - Density: approx. 1350 kg/m³ (typical) - Reaction to fire: Class B-s1,d0 (EN 13501-1) - Thermal conductivity (λ): approx. 0.26 W/m·K (typical) - Bending strength: ≥ 9 N/mm² (typical, EN 634) - Modulus of elasticity: approx. 4500 N/mm² (typical) - Water absorption (24 h): approx. 14% (typical) - Thickness swelling (24 h): ≤ 1.5% (typical) - Moisture content (ex-works): 9 ± 3% (typical) - Linear/thermal expansion: approx. 0.011 mm/m·K (typical) - Surface finish: Smooth sanded, natural grey - Edge profile: Square edge (TG to order) - Weight per board (12 mm): approx. 49 kg per 1220 × 2440 sheet (typical) - Use class: Interior & exterior, humid/load-bearing - Packaging: Banded pallets, edge-protected, shrink-wrapped - Category: Cement Boards (https://construction.techservesolutions.in/materials/category/cement-boards) ## Standards & compliance - EN 634-1 / EN 634-2: The dedicated product standard for cement-bonded particle boards — defines general requirements and the specific mechanical, density and durability requirements for boards bonded with Portland cement for dry, humid and exterior use. - EN 13986: Wood-based panels for use in construction — characteristics, conformity assessment and the basis for CE marking, covering mechanical, fire, formaldehyde and durability declarations. - EN 13501-1: Reaction-to-fire classification of construction products; this board is typically classified B-s1,d0 (limited fire contribution, lowest smoke, no flaming droplets). - ASTM C1185: US test methods for non-asbestos fibre-cement and cement-bonded flat sheet — used to verify flexural strength, density, moisture movement and freeze–thaw performance for North American projects. - ISO 9001: Quality management system under which manufacture, inspection and batch traceability are controlled, supporting consistent and documented product supply. ## Applications - Mezzanine & raised flooring: A high-density, load-bearing deck for mezzanine platforms, raised-access floors and dry screed build-ups where strength and dimensional stability are essential. - Heavy-duty partitions: Robust racking and lining board for demountable and fixed partitions in commercial, industrial and high-traffic environments. - External cladding & façade: A weather-resistant substrate and finish board for rainscreen, rendered and ventilated façade systems exposed to moisture and frost. - Prefabrication & modular: Dimensionally consistent sheets for factory-built wall, floor and roof cassettes in off-site and modular construction. - Soffits & fascias: Durable, rot-proof boarding for external soffits, fascias and sheltered ceiling areas where timber-based panels would fail. - Fire-protective linings: Lining layer in fire-rated wall and floor assemblies where low fire contribution and mineral content are required. ## Features & benefits - High load bearing: Dense cement matrix carries significant point and distributed loads, making it suitable for flooring and structural racking duties. - Water & fire resistant: Mineral-bound construction resists moisture, frost and decay while contributing very little to fire spread or smoke. - Termite & rot proof: Cement bonding renders the board unappetising to insects and immune to fungal decay, ideal for exterior and humid zones. - Sound insulating: Its mass improves airborne and impact sound reduction in partitions and floor build-ups, helping meet acoustic targets. - Easy to work: Cuts, drills, screws and routs with standard carbide tooling — installed using familiar timber-trade techniques. - Dimensionally stable: Low thickness swelling and minimal moisture movement keep joints tight and surfaces flat across changing conditions. ## Installation & handling - Acclimatise boards flat and supported on site for 24–48 hours before fixing so moisture content equalises with the surroundings. - Cut with carbide- or diamond-tipped blades and extract dust; pre-drill near edges to avoid spalling and to set fixings cleanly. - Fix with corrosion-resistant screws at the recommended centres, keeping fixings 15–20 mm from board edges and corners. - Leave a 3–5 mm expansion gap at board perimeters and between sheets; design movement joints into large floor and façade areas. - For external use, seal cut edges and detail to shed water; use compatible breather membranes and ventilated cavities on façades. - Store flat on level bearers, fully supported and protected from ground moisture and standing water until installation. ## Variants & finishes - Standard thickness range: 8, 10, 12, 16, 18, 20, 24 mm and above - Standard sheet size: 1220 × 2440 mm - Extended sizes: 1250 × 3050 mm and cut-to-size on request - Edge profile: Square edge as standard; tongue-and-groove to order - Surface finish: Natural sanded grey (paint, render or tile-ready) - Grade: Interior/humid and exterior load-bearing grades ## Quality & supply Stock thicknesses and the standard 1220 × 2440 mm format ship from inventory on short lead times, while extended sizes, tongue-and-groove edges and cut-to-size panels are produced to order with confirmed schedules at the time of enquiry. Representative samples and full technical documentation — Technical Data Sheet, EN 13501-1 reaction-to-fire classification report, EN 634 / EN 13986 conformity and CE declaration of performance, and a product warranty — are provided on request, and every consignment is supplied with full export documentation for delivery across Europe, North America and beyond. ## Frequently asked questions ### Is this board genuinely Class A / non-combustible? Because it contains wood particles within the cement, the accurate European reaction-to-fire class is B-s1,d0 to EN 13501-1 — limited fire contribution, lowest smoke and no flaming droplets. It is not an A1/A2 mineral board, and we classify it honestly so it can be specified correctly within fire-rated assemblies. ### Can it be used externally and in wet areas? Yes. The cement bond makes it resistant to moisture, frost and decay, so it performs in external cladding, soffits and humid interiors. Cut edges should be sealed and façade details designed to shed water and ventilate the cavity. ### What loads can the flooring grade carry? At approximately 1350 kg/m³ density and ≥ 9 N/mm² typical bending strength, the board is well suited to mezzanine and raised flooring. We provide span and joist-spacing guidance against your imposed loads so the build-up can be verified for your design case. ### How is it cut and fixed on site? It works like a dense timber board — cut with carbide or diamond tooling, pre-drill near edges, and fix with corrosion-resistant screws at recommended centres, leaving a 3–5 mm expansion gap between sheets. ### What finishes can be applied? The natural sanded grey surface accepts paint, render, tile adhesives and most decorative systems directly, with appropriate priming. It is also frequently left as an exposed industrial finish. ### Which thicknesses and sizes are available? Standard supply is 12 mm in 1220 × 2440 mm, with thicknesses from 8 mm to 40 mm, extended sheet sizes and cut-to-size panels available to order in interior/humid and exterior load-bearing grades. ### What documentation ships with an order? Every order is supported by a Technical Data Sheet, EN 13501-1 classification report, EN 634 / EN 13986 conformity and CE declaration of performance, warranty and complete export paperwork for worldwide delivery. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/cement-particle-board --- # Metal Roofing Sheet > Corrugated cover that lasts. Our Metal Roofing Sheet is a corrugated profiled sheet cold-rolled from continuously hot-dip galvanised steel, supplied either mill-finished or pre-painted in a durable organic coating. At a typical 0.5 mm core thickness with a 1000 mm effective cover width, it delivers a high strength-to-weight ratio that lets a single sheet span purlin centres other coverings cannot reach, keeping structures light and erection fast. The zinc or aluminium-zinc metallic layer gives sacrificial, self-healing corrosion protection at cut edges and scratches, while the optional polyester paint system adds colour stability and a second barrier against weathering. Sheets are roll-formed to a regular corrugated profile and cut to the exact rafter length on order, so runs install end-to-end with minimal lapping, less waste and fewer fixings. Manufactured to EN 508-1 and EN 14782 with CE marking, and to ASTM A653/A924 where North American practice applies, the sheet is engineered for industrial, agricultural and residential roofing across a wide span of climates. As a non-combustible steel product it carries a reaction-to-fire performance of Euroclass A1, making it equally suited to warehouses, sheds, canopies and pitched domestic roofs. Supplied across Europe, North America and beyond with full documentation. ## Technical specifications - Core thickness: 0.5 mm (typical; 0.4–0.7 mm available) - Effective cover width: 1000 mm - Base material: Hot-dip galvanised / pre-painted steel (DX51D) - Length: Cut to order, typically up to 8 m - Profile: Corrugated / sinusoidal, ~18 mm rib depth (typical) - Metallic coating: Zinc Z275 (275 g/m²) or AZ150 alu-zinc (typical) - Organic finish: ~25 µm polyester (PE) on pre-painted; nominal 20 µm top + 5 µm primer - Reaction to fire: Euroclass A1 (uncoated/metallic-coated) per EN 13501-1 - Steel grade / yield: S280GD–S350GD, ≥280 MPa yield (typical) - Sheet weight: ~4.5 kg/m² at 0.5 mm (typical) - Thermal conductivity: ~50 W/m·K (steel core) - Coefficient of thermal expansion: ~12 × 10⁻⁶ /K - Salt-spray resistance: 500–1000 h to ISO 9227 (Z275, typical) - Recommended minimum roof pitch: ≥10° (typical, with sealed end laps) - Colour (pre-painted): RAL range to order - Packaging: Strapped bundles on timber bearers, edge-protected, film interleaved - Category: Roofing Sheets (https://construction.techservesolutions.in/materials/category/roofing) ## Standards & compliance - EN 508-1: Roofing and cladding products from metal sheet — specification for self-supporting products of steel sheet, defining tolerances, coatings and performance. - EN 14782: Self-supporting metal sheet for roofing, external cladding and internal lining — product specification, requirements and the basis for CE marking (Annex ZA). - EN 10346: Continuously hot-dip coated steel flat products — material grade (DX51D) and metallic coating classes such as Z275 zinc and AZ150 aluminium-zinc. - EN 13501-1: Reaction-to-fire classification — uncoated and metallic-coated steel sheet achieves Euroclass A1 (non-combustible). - ASTM A653 / A924: US specification for hot-dip zinc-coated (galvanised) steel sheet and the general requirements for metallic-coated sheet, for North American projects. ## Applications - Industrial roofing: Lightweight large-span cover for factories, plants and steel-frame structures where fast, economical weatherproofing is essential. - Warehouses & sheds: Long unbroken runs cut to rafter length minimise laps and speed up enclosure of distribution and storage buildings. - Residential roofs: Pre-painted corrugated sheet provides a durable, colour-stable pitched roof for houses, extensions and outbuildings. - Agricultural buildings: Corrosion-resistant cover for barns, livestock shelters and equipment stores in demanding rural environments. - Canopies & walkways: Stiff, self-supporting sheet roofs car ports, loading bays and covered walkways with minimal supporting steel. - Wall cladding: The same profile doubles as vertical or horizontal façade cladding for a coordinated building envelope. ## Features & benefits - Corrosion resistant: Zinc or alu-zinc metallic coating gives sacrificial, self-healing protection at edges and fixings for long service life. - Lightweight: At around 4.5 kg/m² the sheet reduces structural loads, transport cost and on-site handling effort. - Large spans: High stiffness from the corrugated profile lets sheets bridge wide purlin centres with fewer supports. - Fast install: Cut-to-length sheets fix straight to purlins with self-drilling screws, covering large areas quickly with minimal lapping. - Non-combustible: Steel core delivers a Euroclass A1 reaction-to-fire performance, contributing nothing to fire growth. - Colour choice: Pre-painted polyester finish is available across a wide RAL range for design freedom and weather durability. ## Installation & handling - Fix into purlin crowns with self-drilling/self-tapping screws and bonded EPDM washers at the recommended pitch; do not over-tighten. - Lay sheets working away from the prevailing wind and maintain a minimum one-corrugation side lap, sealed where pitch is low. - Provide adequate end-lap (typically ≥150 mm) with mastic or butyl sealant tape on shallow pitches to prevent capillary water ingress. - Cut and drill on the ground using nibblers, shears or slow-speed saws — never an abrasive disc, which damages the coating and causes edge rust. - Remove all swarf, off-cuts and filings from the finished roof daily to avoid rust staining of the paint or metallic coating. - Handle bundles by the lift points, store off the ground under cover on a slight fall, and remove protective film promptly after fixing. ## Variants & finishes - Finish — Galvanised (GI): Mill-finished hot-dip zinc Z275, ready to weather or over-paint - Finish — Pre-painted (PPGI): ~25 µm polyester colour coat over galvanised base, RAL to order - Metallic coating: Zinc Z275 or aluminium-zinc AZ150 (Galvalume-type) - Core thickness: 0.40 / 0.45 / 0.50 / 0.60 / 0.70 mm - Length: Cut to order, typically 1.5–8.0 m per sheet - Colour range: Standard RAL roofing shades; custom colours on request ## Quality & supply Galvanised and standard-colour pre-painted sheet in common thicknesses is typically held in stock for short lead times, while bespoke colours, metallic-coating upgrades and large fixed-length orders are made to order with indicative lead times confirmed at enquiry; representative samples and colour chips are available before commitment. Every consignment ships with a full documentation pack — Technical Data Sheet, mill and coating certificates, declaration of performance for CE marking, and finish warranty where applicable — and we supply across Europe, North America and beyond, handling export packing, marking and shipping documentation throughout. ## Frequently asked questions ### What is the difference between galvanised (GI) and pre-painted (PPGI) sheet? GI is mill-finished zinc-coated steel that weathers to a natural grey; PPGI adds a coloured polyester paint system over the zinc for a chosen RAL colour and a second layer of weather protection. Both share the same corrosion-resistant base. ### What roof pitch and lapping do these sheets need? A minimum pitch of around 10° is recommended. Use at least a one-corrugation side lap and an end lap of roughly 150 mm; on shallower pitches seal laps with butyl tape or mastic to prevent capillary water ingress. ### Can you supply sheets cut to my exact rafter length? Yes. Sheets are cut to order, typically up to 8 m, so a single length can run eave-to-ridge with no intermediate end lap — reducing waste, fixings and installation time. ### How corrosion resistant is the coating? A Z275 zinc coating gives sacrificial, self-healing protection and typically withstands 500–1000 hours of salt-spray testing to ISO 9227. For coastal or aggressive environments an AZ150 aluminium-zinc coating offers extended durability. ### Are the sheets fire-rated? Yes. As a steel product the sheet is non-combustible and achieves a reaction-to-fire performance of Euroclass A1 to EN 13501-1 in its uncoated and metallic-coated forms, contributing nothing to fire growth. ### Which standards and certification do the sheets carry? They are manufactured to EN 508-1 and EN 14782 with CE marking, from EN 10346 hot-dip coated steel, and to ASTM A653/A924 for North American projects. A declaration of performance and mill certificates accompany each order. ### Do you export, and what documentation is provided? Yes — we supply across Europe, North America and beyond. Each consignment ships with a Technical Data Sheet, mill and coating certificates, a CE declaration of performance, finish warranty where applicable, and full export packing and shipping documentation. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/metal-roofing-sheet --- # Polycarbonate Sheet > Daylight without the heat. Polycarbonate sheet is the architect's answer to the question of how to bring daylight into a space without bringing the heat, glare and fragility of glass with it. Engineered as both solid and multiwall (twinwall and cellular) panels, it transmits a controlled measure of natural light while a co-extruded UV layer screens out the wavelengths that fade, yellow and degrade. At a fraction of the weight of glass and with impact strength many times greater, it spans skylights, canopies and covered walkways that need to be safe, luminous and quietly durable. The TSS programme covers clear, bronze, opal and grey tints from 4 mm upward, in solid sheet for crisp optical clarity and multiwall constructions where thermal insulation and reduced weight matter most. Every sheet carries one-sided or two-sided UV protection and is supplied with a 10-year limited warranty against loss of light transmission and excessive yellowing under normal exterior exposure. Manufactured to ISO 11963 and, for cellular grades, EN 16153, the panels meet the dimensional, optical and mechanical benchmarks the specification expects. Supplied across Europe, North America and beyond, the range is held to consistent quality, fire and weathering benchmarks so that the panel approved in a sample is the panel that arrives on site. TSS works as a specialist partner from selection through to delivery, advising on tint, wall structure, span tables and fixing so the finished glazing performs across decades of sun, hail and thermal cycling. ## Technical specifications - Material: Polycarbonate (PC), co-extruded UV layer - Construction: Solid sheet · multiwall (twin/triple/X-structure) - Thickness: 4 mm+ (solid); 4–25 mm (multiwall) - Standard sheet size: 1220 × 2440 mm (other widths/lengths to order) - Tints: Clear · bronze · opal · grey - Light transmission: Typical 80–90% clear; lower for tinted/opal grades - UV protection: Co-extruded, one-sided or two-sided - Density (solid PC): Typical 1.20 g/cm³ - Thermal conductivity (solid): Typical 0.20 W/m·K - U-value (multiwall): Typical 3.9–1.4 W/m²K by structure/thickness - Coefficient of thermal expansion: Typical 65 × 10⁻⁶ /K (≈3 mm per metre per 50 °C) - Service temperature: Typical −40 °C to +120 °C - Reaction to fire: Typical Class B-s1,d0 to EN 13501-1 (grade/thickness dependent) - Impact strength: Virtually unbreakable; up to ~200× the impact resistance of glass - Weight (solid, 4 mm): Typical ~4.8 kg/m² - Warranty: 10-year limited UV warranty - Category: Roofing Sheets (https://construction.techservesolutions.in/materials/category/roofing) ## Standards & compliance - ISO 11963: Plastics — polycarbonate sheets: types, dimensions and characteristics, including optical, mechanical and weathering requirements. - EN 16153: Light-transmitting flat multiwall polycarbonate sheets for internal and external use in roofs, walls and ceilings — requirements and test methods. - EN 13501-1: Reaction-to-fire classification of construction products; UV-grade polycarbonate typically achieves Class B-s1,d0 (grade and thickness dependent). - EN 1013: Profiled, light-transmitting single-skin plastics sheets for roofing — relevant where corrugated/profiled polycarbonate is used as roof covering. - ISO 9001 / CE marking: Quality-management certification of manufacture and CE conformity for construction-product placement on the EU/UK market. ## Applications - Skylights & rooflights: Brings diffuse, UV-screened daylight deep into interiors with a glazing that resists hail and accidental impact. - Canopies & porches: Lightweight clear or tinted covers for entrances and walkway shelters that shed rain while staying bright underneath. - Covered walkways: Long-span overhead glazing for transit links and campuses, combining daylight, weather protection and vandal resistance. - Greenhouses & horticulture: Multiwall sheets deliver insulated, light-diffusing cover that protects plants from UV stress and reduces heat loss. - Pool & atrium enclosures: Warm, condensation-managed glazing for swimming halls and atria where weight and safety rule out heavy glass. - Industrial & agricultural roofing: Profiled and flat panels for natural top-lighting of warehouses, barns and production halls. ## Features & benefits - UV protected: A co-extruded UV layer screens damaging wavelengths, guarding both the sheet and the people and goods beneath against fading and yellowing. - High impact strength: Effectively unbreakable in normal use — up to around 200 times the impact resistance of glass — for safe overhead and public-access glazing. - Light transmitting: Clear grades pass typically 80–90% of visible light; opal and tinted options soften glare and manage solar gain. - Lightweight & easy to handle: Roughly half the weight of equivalent glass, simplifying frames, fixings, transport and on-site installation. - Thermal insulation (multiwall): Air-filled cellular structures cut heat loss, improving comfort and energy use in greenhouses, pools and atria. - 10-year warranty: Backed by a 10-year limited warranty against excessive loss of light transmission and yellowing under normal exterior exposure. ## Installation & handling - Always install with the printed UV-protected face outward, towards the sun; the protective film marks this side and should stay on until fixing is complete. - On multiwall sheets, orient the flutes/webs to run vertically or down the slope so condensation drains, and seal the top edge with solid tape and the bottom with vented anti-dust tape. - Allow for thermal movement — pre-drill oversized holes (typically 3 mm clearance per metre of sheet) and fix with washered, gasketed screws; never over-tighten. - Maintain the manufacturer's minimum cold-bend radius and recommended purlin spacing for the chosen thickness to avoid stress and deflection. - Clean only with lukewarm water, mild soap and a soft cloth; avoid abrasive pads and incompatible solvents or sealants that can craze the surface. - Store flat, dry and out of direct sun before installation, with protective film retained and sheets kept clear of standing water. ## Variants & finishes - Solid sheet: Optical-clarity glazing, 4 mm+ , clear/bronze/grey - Twinwall multiwall: 4–10 mm insulated cellular sheet, clear/opal - Multiwall (X / honeycomb): 16–25 mm high-insulation structures for roofs & façades - Profiled / corrugated: Single-skin roofing profiles to match common metal/fibre sheet - Tints: Clear · bronze · opal (diffusing) · grey (solar control) - UV protection: One-sided (standard) or two-sided to order ## Quality & supply Standard tints, thicknesses and the 1220 × 2440 mm format in clear, bronze, opal and grey are typically held for prompt despatch, while bespoke tints, two-sided UV grades, cut-to-size panels, profiled sections and large project volumes are made to order on indicative lead times confirmed at enquiry; A4 samples and full sheets are available for approval, every consignment ships with a Technical Data Sheet, declaration of performance / CE documentation, reaction-to-fire classification and the 10-year limited UV warranty, and the range is supplied across Europe, North America and beyond with complete export documentation, certificates of origin and conformity prepared to suit the destination market. ## Frequently asked questions ### What is the difference between solid and multiwall polycarbonate? Solid sheet behaves like shatter-resistant glass with the highest optical clarity, ideal for vertical glazing and canopies. Multiwall (twin/triple/cellular) sheet uses air-filled flutes for far better thermal insulation and lighter weight, suiting roofs, greenhouses and pool enclosures. ### How much light does it let through, and does it block UV? Clear grades transmit typically 80–90% of visible light, with opal and tinted options reducing this to soften glare and solar gain. A co-extruded UV layer screens out the harmful wavelengths below roughly 385 nm, protecting both the sheet and whatever sits beneath it. ### What is the fire performance? UV-grade polycarbonate typically achieves Class B-s1,d0 to EN 13501-1 — low flame spread, low smoke and no flaming droplets — though the exact class depends on grade and thickness. Classification reports are provided with each order. ### How does the 10-year warranty work? It is a limited warranty covering excessive loss of light transmission and yellowing under normal exterior exposure, provided the sheet is installed UV-side out and handled per the guidelines. Documentation accompanies every consignment. ### Can the sheets be cut, curved and drilled on site? Yes. Polycarbonate cuts with fine-tooth saws, drills cleanly and cold-bends to a minimum radius set by thickness. Fixing holes must be oversized to allow thermal movement, and the UV face kept outward. ### Which tints and thicknesses are available? Clear, bronze, opal and grey from 4 mm upward, in solid sheet and 4–25 mm multiwall structures, at the 1220 × 2440 mm standard size with other widths, lengths and profiled sections made to order. ### Do you supply outside your home market with full documentation? Yes — sheets are supplied across Europe, North America and beyond, each shipment carrying the TDS, declaration of performance / CE documentation, fire classification, warranty and the export paperwork required for the destination. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/polycarbonate-sheet --- # uPVC Roofing Sheet > Quiet, rust-free, heat-cutting. uPVC roofing sheets are engineered as a long-life alternative to metal cover where corrosion, chemical attack, heat gain and noise are the dominant concerns. Built up from multiple co-extruded layers of unplasticised PVC with a weather-grade ASA cap, the sheet resists the rust, pitting and electrolytic decay that shorten the life of steel and aluminium roofs. The result is a stable, low-maintenance covering that holds its colour and structural integrity across long service intervals. The multi-layer construction does more than protect against corrosion. The cellular PVC core slows the transfer of solar heat into the building below, keeping interiors measurably cooler than under bare metal, while the same mass damps the drumming of rain and hail that makes thin-gauge roofs so loud. Because uPVC is inherently inert to most acids, alkalis and salts, the sheet is equally at home over a fertiliser store, a poultry house or a chemical process hall. Manufactured to a trapezoidal profile for predictable purlin spanning and straightforward overlap, the sheets are supplied across Europe, North America and beyond with the technical documentation, fixings and accessories needed for a complete, code-compliant roof. Each consignment is produced under a quality-managed process and can be matched to project length, colour and translucency requirements. ## Technical specifications - Build: Multi-layer uPVC core with ASA weather cap - Profile: Trapezoidal - Standard width (cover): Typical 1,000–1,070 mm - Sheet thickness: Typical 2.0–3.0 mm - Length: Cut to order, typical up to 12 m - Weight per unit area: Typical 3.5–4.5 kg/m² - Density: Typical 1.40–1.45 g/cm³ - Thermal conductivity: Typical 0.16–0.20 W/m·K - Sound reduction: Typical 20–28 dB (rain-noise damping) - Reaction to fire: Typical Class B–C, s2-s3, d0 (EN 13501-1) - Water absorption: Typical < 0.2% by mass (24 h) - Coefficient of thermal expansion: Typical 6–8 × 10⁻⁵ /K - Service temperature range: Typical −20 °C to +60 °C - UV protection: ASA-capped, colour-stabilised surface - Finish: Smooth matt; opaque or translucent options - Packaging: Interleaved, film-wrapped, banded on timber pallets - Category: Roofing Sheets (https://construction.techservesolutions.in/materials/category/roofing) ## Standards & compliance - EN 13501-1: Reaction-to-fire classification (Euroclass) of the sheet for use in building roofs and cladding. - EN ISO 1183: Determination of the density of the PVC compound, underpinning declared weight and quality consistency. - EN ISO 62 / ASTM D570: Water absorption of plastics, confirming the sheet's low moisture uptake and dimensional stability. - ASTM D635: Rate of burning / flammability test for self-supporting plastics, an ASTM reference for fire behaviour. - ISO 9001: Quality management of the manufacturing process, supporting batch consistency and full documentation. ## Applications - Factory & industrial roofing: A cool, quiet, low-maintenance cover for production halls and assembly buildings where metal would corrode or radiate heat. - Poultry houses & farm buildings: Resists ammonia, moisture and washdown chemicals while keeping livestock interiors cooler and calmer than metal sheet. - Warehouses & logistics sheds: Long spanning trapezoidal cover that reduces rain noise and solar heat gain over large stored-goods areas. - Chemical & fertiliser plants: Inert to most acids, alkalis and salts, making it suited to corrosive process and storage environments. - Wash bays & wet processing areas: Stable under constant humidity and splash without rusting, flaking or staining. ## Features & benefits - Corrosion-free: Will not rust, pit or corrode, eliminating the principal failure mode of steel and aluminium roofs. - Heat insulating: Low thermal conductivity and a cellular core cut solar heat transfer, keeping interiors cooler. - Sound damping: The sheet's mass and structure absorb the drumming of rain and hail for a quieter building. - Chemical resistant: Inert to a wide range of acids, alkalis, salts and fumes for harsh industrial and agricultural settings. - Colour-stable surface: The ASA weather cap holds colour and resists UV chalking over long outdoor exposure. - Low maintenance: No painting or rust treatment is required, reducing whole-life roof costs. ## Installation & handling - Lay sheets with the recommended end and side laps and fix down-slope to maintain weather-tight overlaps. - Fix through the crown of the profile using corrosion-resistant screws with EPDM-bonded washers, predrilling oversize holes to allow for thermal movement. - Do not over-tighten fasteners; the washer should seal without distorting the profile. - Maintain a minimum roof pitch in line with the profile and lap detail to ensure positive drainage. - Support free edges and ends on purlins; observe the maximum recommended purlin spacing for the sheet thickness specified. - Handle and store flat, clear of the ground, and keep film-wrapped and shaded until installation to protect the surface. ## Variants & finishes - Construction: Multi-layer uPVC / ASA - Profile: Trapezoidal (standard) - Opacity: Opaque or translucent (rooflight) - Thickness: Typical 2.0 / 2.5 / 3.0 mm - Colour: Grey, terracotta, blue, green (project colours to order) - Length: Cut to project requirement ## Quality & supply Stock profiles and standard colours are typically available for prompt despatch, while bespoke lengths, colours and translucent rooflight runs are produced to order on confirmed lead times advised at enquiry; representative samples and cut sections can be provided for evaluation and approval ahead of bulk manufacture. Every consignment ships with full documentation — technical data sheet, declaration of performance / CE marking where applicable, reaction-to-fire and water-absorption test references and a product warranty — and we supply across Europe, North America and beyond with complete export paperwork, including certificates of origin and packing details, prepared to suit the destination market. ## Frequently asked questions ### How does uPVC roofing compare with steel or aluminium sheet? Unlike metal, uPVC cannot rust or corrode and is inert to most chemicals, so it suits corrosive and humid environments. It also insulates against heat and noise far better than bare metal, at the cost of a lower span capacity for a given thickness. ### Is the sheet resistant to acids and ammonia? Yes. Unplasticised PVC is chemically inert to a wide range of acids, alkalis, salts and fumes, including the ammonia found in poultry houses, which makes it well suited to chemical, fertiliser and agricultural buildings. ### What is the fire classification? The sheet typically achieves a Euroclass of B–C (s2-s3, d0) to EN 13501-1, meaning it is flame-retardant and self-extinguishing. The exact class is confirmed by test report for the thickness and grade supplied. ### Can it be supplied in translucent form for rooflights? Yes. A translucent grade is available to introduce diffused daylight, and it is profile-matched to the opaque sheet so the two can be laid in the same roof plane on the same purlin layout. ### How is thermal movement handled during fixing? uPVC expands more than metal, so fixing holes are drilled oversize and screws are fitted through the crown with sealing washers, not over-tightened, allowing the sheet to move freely without buckling or splitting. ### What lengths and colours are available? Sheets are cut to project length up to typical maximums, in standard thicknesses of around 2.0–3.0 mm and a range of colours such as grey, terracotta, blue and green; bespoke project colours can be produced to order. ### Do you supply outside the home market with documentation? Yes. We supply across Europe, North America and beyond, and each shipment is accompanied by a technical data sheet, test report references, warranty and full export documentation prepared for the destination. ## How to order - Request a quote: https://construction.techservesolutions.in/contact - Email: info@techservesolutions.in - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/materials/upvc-roofing-sheet --- # Tools & Estimators Free building-material tools from TSS Building Material Division — they run in the browser, with nothing to install: - **Coverage & Quantity Estimator** — Area → panels, boards or sheets, with waste. - **Length & Area Converter** — Metric ↔ imperial for specs & BOQs. Source: https://construction.techservesolutions.in/tools --- # Coverage & Quantity Estimator Free building-material estimator: enter a wall or floor area to work out how many wall panels, WPC planks, cement boards or roofing sheets you need — including a waste allowance. Free tool by TSS Building Material Division — Area → panels, boards or sheets, with waste. Runs in your browser. Source: https://construction.techservesolutions.in/tools/coverage-estimator --- # Length & Area Converter Free length and area unit converter for building specifications: convert between millimetres, centimetres, metres, feet, inches, m² and ft² instantly. Free tool by TSS Building Material Division — Metric ↔ imperial for specs & BOQs. Runs in your browser. Source: https://construction.techservesolutions.in/tools/unit-converter --- # About TSS Building Material Division is the building-materials arm of Tech Serve Solutions, established 1998. We supply and export finishing & façade materials — wall panels, WPC cladding, louvers, uPVC windows & doors, cement boards and roofing — as a specialist partner, not a faceless trader. Source: https://construction.techservesolutions.in/about --- # Contact Request a quote, a sample or a specification. - Email: info@techservesolutions.in - Phone: +1 512 256 1737 - United States: 5900 Balcones Drive, #16141, Austin 78731, TX - Supplied across Europe, North America and beyond. Source: https://construction.techservesolutions.in/contact