TSS·DWA
Wall Panels
3D Wall Panel
Texture that catches the light.
The 3D Wall Panel transforms an ordinary flat surface into a sculpted feature wall. Each tile carries a deep, repeating relief pattern that reads as shadow and highlight as light moves across it, giving depth and rhythm to receptions, headboards and hospitality interiors without the weight or cost of plaster mouldings or carved stone.
The 3D Wall Panel transforms an ordinary flat surface into a sculpted feature wall. Each tile carries a deep, repeating relief pattern that reads as shadow and highlight as light moves across it, giving depth and rhythm to receptions, headboards and hospitality interiors without the weight or cost of plaster mouldings or carved stone.
Formed from rigid PVC or compressed plant fibre, the panels are light enough to lift and fix by hand yet dimensionally stable across normal interior conditions. They arrive primer-ready and accept emulsion, eggshell or spray finishes, so the same panel can be specified matt white, a deep accent tone or a metallic effect to suit the scheme.
Panels butt together on a tessellating edge so the relief continues seamlessly across large runs with the joints visually lost in the pattern. They bond directly to plasterboard, plaster, MDF or any sound, dry substrate using a grab adhesive, making them well suited to refurbishment and fast fit-out programmes. Supplied to international interior-lining standards across Europe, North America and beyond.
- Pattern
- Sculpted relief, tessellating
- Material
- Rigid PVC or compressed plant fibre
- Nominal tile size
- 500 × 500 mm (typical)
- Panel thickness
- 1.0–3.0 mm sheet, 12–30 mm relief depth (typical)
- Weight per tile
- ~0.4–0.9 kg (typical, by material)
- Finish
- Primed, paintable (emulsion / eggshell / spray)
- Fixing method
- Grab adhesive to sound substrate
- Reaction to fire
- Typ. Euroclass B-s2,d0 to D-s2,d0 (EN 13501-1, grade-dependent)
- Density
- PVC ~1.4 g/cm³; plant-fibre board ~0.8–1.0 g/cm³ (typical)
- Water absorption
- PVC <0.2%; fibre board higher, interior dry use (typical)
- Thermal conductivity (λ)
- ~0.16–0.19 W/m·K (typical)
- Linear thermal expansion
- PVC ~7×10⁻⁵ /K (typical)
- Service environment
- Interior, dry; not for permanent wet or exterior exposure
- Coverage
- 4 tiles per m² at 500 × 500 mm (typical)
- Packaging
- Flat-packed cartons, interleaved, on shrink-wrapped pallets
▸Feature walls
Creates a single sculpted accent wall in living spaces, offices and retail that draws the eye and adds depth.
▸Reception & lobby
Forms a textured backdrop behind desks and logos for a strong, considered first impression.
▸Headboards
Builds a soft, three-dimensional headboard zone in bedrooms and hotel rooms without joinery.
▸Hospitality
Lines bars, restaurants and lounges with relief texture that photographs well under accent lighting.
▸Commercial fit-out
Refreshes corridors, meeting rooms and break-out areas quickly over existing sound surfaces.
▸Bold relief texture
Deep sculpted pattern reads as light and shadow, giving a flat wall genuine three-dimensional depth.
▸Lightweight
Each tile lifts and positions by hand, speeding installation and reducing load on the substrate.
▸Paint to any colour
Primed surface accepts emulsion, eggshell or spray, so the panel matches any scheme on site.
▸Easy fix
Bonds directly with grab adhesive to plasterboard, plaster or MDF — no battens or sub-frame needed.
▸Seamless tessellation
Matched edges let the relief continue across large runs with joints lost in the pattern.
EN 13501-1
Reaction-to-fire classification (Euroclass) for the panel as a wall and ceiling lining.
EN 13986
Wood-based panels for construction — properties and conformity, applicable to the plant-fibre variant.
EN ISO 11925-2
Single-flame ignitability test underpinning the reaction-to-fire class.
ISO 9001
Quality-management system governing manufacture, inspection and batch traceability.
CE marking
Declaration of conformity to the applicable harmonised European standards for placing on the EU/UKCA market.
- ▸Fix only to a sound, dry, clean and reasonably flat substrate such as plasterboard, plaster, MDF or painted masonry.
- ▸Acclimatise panels flat in the room for 24–48 hours before fixing to stabilise to interior temperature and humidity.
- ▸Apply a continuous bead grab adhesive to the panel back, press firmly into place and align the pattern edges before the next tile.
- ▸Cut to size with a fine-tooth blade or sharp knife; plan the layout from a centre line so border tiles balance.
- ▸Fill and sand butt joints if a fully monolithic surface is wanted, then prime any cut edges before painting.
- ▸Keep for interior, dry locations; avoid permanently wet, high-humidity or exterior exposure.
- Material
- Rigid PVC or compressed plant fibre
- Pattern
- Range of sculpted relief geometries (wave, diamond, block and organic)
- Finish
- White primed (paint-ready) as standard
- Tile size
- 500 × 500 mm standard; other formats made to order
- Relief depth
- Low-profile or deep-relief options
Standard patterns in white primed finish are typically held in stock for rapid despatch, while bespoke patterns, formats, factory colours and project volumes are made to order with indicative lead times confirmed at enquiry. Physical samples and pattern swatches are available for specification and approval before commitment. Every order ships with full documentation — a technical data sheet, reaction-to-fire and conformity test reports, the CE declaration of performance where applicable and a product warranty — and we supply across Europe, North America and beyond with complete export paperwork to suit the destination market.
3D Wall Panel
questions.
The PVC variant tolerates occasional splash and humidity, but the range is specified for interior, dry locations. We do not recommend permanently wet, steam-heavy or exterior use; ask us about dedicated wet-area panels for those settings.
They are supplied white primed and paint-ready. Apply emulsion, eggshell or a spray finish in any colour. We can also discuss factory-applied colours on made-to-order runs.
Reaction to fire is typically Euroclass B-s2,d0 to D-s2,d0 to EN 13501-1, depending on material and finish. We confirm the exact class and provide the supporting test report for your specified product.
Any sound, dry, clean surface — plasterboard, plaster, MDF or painted masonry — using a grab adhesive. No battens or sub-frame are required, which makes them well suited to refurbishment.
The tessellating edges let the relief pattern continue across panels with the joint hidden in the geometry. For a fully monolithic surface, fill and sand the butt joints, then prime before painting.
Panels are interleaved in flat-packed cartons on shrink-wrapped pallets to protect the relief faces, and we ship worldwide with full export documentation suited to the destination.
Yes. Standard 500 × 500 mm patterns are typically stocked; bespoke patterns, formats and project volumes are made to order with lead times confirmed at enquiry.
Wall Panels
Decorative PVC Wall Panel
Rigid PVC panels with a laminated marble, wood or solid finish that click-lock into place — waterproof, wipe-clean and fitted in a fraction of the time of tiling.
- Size
- 300 × 2900 mm
- Thickness
- 9 mm
- Finish
- Marble · Wood · Solid
- Designs
- 50+ patterns
Wall Panels
Fluted Wall Panel
Slatted fluted panels in WPC and charcoal finishes that bring warmth and vertical rhythm to walls and ceilings — acoustic-friendly and quick to install.
- Profile
- Fluted / slat
- Material
- WPC · charcoal
- Finish
- Wood tones
- Length
- Up to 2900 mm